Jump to content
SAU Community

Recommended Posts

My first go at drag racing pretty clean run. 60ft could be better but its a track setup and very very stiff :P

R32 GTR

ET: 11.495

MPH: 121.57

FUEL: ULTIMATE

TYRES: 255/40/17 A048'S

NITRO: NO

video link - right click save as

Edited by Angus Smart
My first go at drag racing pretty clean run. 60ft could be better but its a track setup and very very stiff :closedeyes:

R32 GTR

ET: 11.495

MPH: 121.57

FUEL: ULTIMATE

TYRES: 255/40/17 A048'S

NITRO: NO

video link - right click save as

woah!! for a first run, thats awesome!!!!

R31 silhoutte

60ft:1.68

10.21 at 140.89mph

pump fuel, full exhaust, 25psi, footbrake(transbrake not working), et street bias plys

Rb30 SOHC, 850hp gt4294, powerglide, 3500rpm stall, 3.45 diff gears.

a chick in the 10s!!! AWESOME!! :) nice work :D

woah!! for a first run, thats awesome!!!!

Thankyou! i think i might get the fcon tuned, my afr's lifted somewhere from below 9 to somewhere a bit leaner

get a tripod and an in car camera and do it again in a few weeks. it should be another fun night for the few minutes of running! and hours of waiting :(

Thankyou! i think i might get the fcon tuned, my afr's lifted somewhere from below 9 to somewhere a bit leaner

get a tripod and an in car camera and do it again in a few weeks. it should be another fun night for the few minutes of running! and hours of waiting :(

Geez blue brother, I wouldnt mind going next time your out! What brand tyres? :thumbsup:

Geez blue brother, I wouldnt mind going next time your out! What brand tyres? :)

Hey just using yokohama a048's i'll probably head out in a few weeks! you had much luck selling yours yet?

howd you get down to 10.7? i was aiming for something like that :)

  • 2 weeks later...
Hey just using yokohama a048's i'll probably head out in a few weeks! you had much luck selling yours yet?

howd you get down to 10.7? i was aiming for something like that :rofl:

Just drive the ass off it Blue Brother!!! Federal tyres at 20psi. Plus it was only 10.9 :w00t: . Plenty of wheelspin though. No real luck selling it yet but thats fine cos I love her! :blink:

Car: R33 GTST

Turbo: Slide high-flow

Tyres: Federal SS595 255/45/17 @ 18psi

Date: 03-05-07

Time: 11:05pm

Output in rwkw: 215 according to the Allstar dyno......

Track: Willowbank

Air Temp: 16 degrees

Track Temp: 25 degrees

Humidity: 1015mB

Reaction time: .597

60ft: 1.841

330ft: 5.36

660ft: 8.22

1000ft: 10.68

ET: 12.70

MPH: 112.3

post-8870-1178261398.jpg

Car: R32 GTST

Turbo: 2535

Tyres: M/T 255

Date: 02-05-07

Time: 09:58pm

Output in rwkw: 235

Track: WSID

Reaction time: .446

60ft: 1.868

330ft: 5.274

660ft: 8.122

ET: 12.55

MPH: 107.8

First time @ any leagal drags.. loved it !

post-1041-1179319651_thumb.jpg

Edited by jnr32r
  • 2 weeks later...

Car: R33 GTST

Turbo: Slide high-flow

Tyres: Federal SS595 255/45/17 @ 18psi

Date: 16-05-07

Time: 5:39pm

Output in rwkw: 215 according to the Allstar dyno......

Track: Willowbank

Air Temp: 21 degrees

Track Temp: 29 degrees

Humidity: 1018mB

Reaction time: .782

60ft: 1.73

ET: 12.58

MPH: 111.3

post-8870-1179312719_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...