Jump to content
SAU Community

Recommended Posts

RS4s wheels are 17 x 7.5 +30 I just replaced mine recently. Don't have them anymore as I sold them so I can't be much help on the measurement side of things.

what are you running now and what are your clearances?

If you have a look on page 8 there is some pics of my car there with rims on it. In terms of fitment my guards are standard e.g. no rolling. The front outside edge of the rim is pretty much flush with the guard. The rear is in ever so slightly, maybe 10mm. On the inside I reckon I have close to an inch of clearance from the inside of the wheel to the shock body. The overall height of my wheels is near enough identical to the 215/50/17 inch tyres I had on the car before.

I could have my car alot lower without any clearance issues, I used to have it alot lower on my 17's but i kept scraping the underneath when going into the driveway and over speed humps so I raised it about an inch. Heres a couple of pics

(FYI I run Greddy coilovers so not sure how this would compare to standard struts).

post-39581-1250229527_thumb.jpgpost-39581-1250229603_thumb.jpgpost-39581-1250229643_thumb.jpg

im looking at buying a rs4s and ive got a set of rims in mind that are 19x8 with +35 offset, do you think i'll have issues? or will they sit too far in, eg look crap

it's probably pretty clear by now that my wheel fitement standards are a little more agressive than the majority of you blokes and that by my standards they really will look sunken to all buggery

look at petes white rs4s a few posts back, the wheels you are looking at will sit 39mm in from them :S inner clearance will be about the same

hmmmm

i just looked them up and it appears they will extend out further than the standard rims by an ENTIRE 1mm !!!

but the rims im looking at dont seem to be available in a smaller offset :(

anyone else running on aftermarket wheels that only just extend out or are the same as the standard rims??? .....with pics???

at the moment im looking at either Konig - Hotswap Silver or Vault Crystal, both are 19 x 8 with +35 offset. also considering the vaults in 20 x 8.5 +35 but im not sure if they will foul the strut

i know its been a long three or so years, most certainly glad to be back

i put down a deposit on the new stagea today

Great to hear Andy.

Mikey is going to help me fit something to the yellow pig soon....when they are in stock so if you want to come over and share a beer and wave your hands around and point while I flounder around you are more than welcome.

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...