Jump to content
SAU Community

Recommended Posts

Darrin,

ill be putting a deposit on a 260 RS tomorrow morning :P

thanks for the details, sounds like you know your stuff!!!

guessing that stag in you pic is yours, are those front guards wider than the stag ones? how well do the wheels sit on yours?

and the wheels are face 1 19 x 9.5" +21

Edited by thrashworks

looking at a set of works - 19x10 +20 any idea if these will fit on a 260RS?

its got coilovers (not sure what brand as i haven't got the car yet, just put a deposit on it)...

white 260RS with fat black wheels with dish? :D and would make girls be all like :)

  • 1 month later...

just bought my stagea last week, it had 17x8" all around (RS4 manual so no auto rear stick out) that sat way too far in and were missing centre caps, i just got some new speedy cobolts in black and in 18x8" with a et+35 offset after 4 days. soooo much better. i found out once i pulled the old rims off that they were fouling the rear struts and were 17x8 et+42 which is WAY too high. id say +35 is the highest offset i would run on a stagea. i could tuck these new rims very easily too. my guess it for a 8 - 8.5" wide rim et+28 would be perfectly flush with the body of the car. was guna go bigger but have a baby on the way so i want some comfort still.

  • 2 weeks later...

G'day all,

2000 Stagea RS-V

19 x 8.5 Koya Vizzo Rims +35

235/40/19 Kuhmo

Tein S-Tech Springs

KYB shocks all round

Comment: Falcoon offset! Should have gone 245's. Needs maybe 10-15mm spacer on front, not overly phased about it though . No scrapes - easy clearance.

Regards,

Mike

thanks Dave.J for the photos.

ndsoccrudenfarm0161b.jpg

ndsocsauandcsaconcourss.jpg

ndsocsauandcsaconcourss.jpg

I've had a look through this, but still am not 100% sure. Will I be able to run 19x9.5 rims on an RS4S with stock suspension? What offset would I need? What sort/size tyres would people recommend?

These are the rims I'm looking at post-76194-0-72527900-1292399278_thumb.jpg

  • 7 months later...

Hi guys,

I know I'm digging up an old thread, but I'm looking to get some Enkei RPF1's in 18x9.5 +15 for my RS4S, which from what I have read in this topic should fit. But the guy I am looking at buying them through spoke to Enkei and was told that they had fitted them in a +30 offset, but wouldn't guarantee +15 would fit. I thought +30 would be too high? Any clarification would be awesome! Also, if anyone knows if these rims will fit Brembos or other big brakes underneath that would be great to know too.

Thanks

Tim

9.5 width with a +30 offtset WILL NOT clear the rear strut / coilovers on an RS4-S

+15 would be good but its going to be hella flush. depends on if you one of the "i hate wheels sticking out the guards" kinda people

even better, get a +15 for the rear and a 30+ for the front.

i just put a 15mm bolt on spcaer on the rear of my rs4s and now it sits just as flush as the front wheel

Edited by RS4-S

9.5 width with a +30 offtset WILL NOT clear the rear strut / coilovers on an RS4-S

+15 would be good but its going to be hella flush. depends on if you one of the "i hate wheels sticking out the guards" kinda people

even better, get a +15 for the rear and a 30+ for the front.

i just put a 15mm bolt on spcaer on the rear of my rs4s and now it sits just as flush as the front wheel

Just went and double checked the spec sheet, it's either 18x9 + 35, 18x9.5 +15 or 18x9.5 +38, there is no 18x9.5 +30 unfortunately. I want to try and avoid running spacers if at all possible.

hey guys.. wondering if 19x8 +35 will fit my 1999 RS4-S Stagea (Manual and hicas)?

Ive tried the wheel calculator, but i get different results all the time.. Ive yet to get my head around it all..

cheers!

  • 3 weeks later...

Tried taking spacers off my RS4S (manual), they were a dealer fitted bonus I didnt want.

V35 skyline rims on the rears are 17x8 +33 and rub on my coilovers with 235/50.

But with a bolt on 27mm spacer are perfect for guard clearance..

How the hell do I pass inspection for WA licensing next monday?

Edited by shane344
  • 1 month later...

Finally got the stag some new shoes... was sick of the R34 GTT 17's with their weak offsets!! (it also didnt help running 35 series tyres...)

Anyway they are 18x9.5 +22... Lowered on BC's with a bit of rear camber got them to clear the guards and have about 20mm from the strut!

Pics arent the best but you get the idea!

post-65306-0-05503500-1318673181_thumb.jpg

post-65306-0-30130600-1318673370_thumb.jpg

post-65306-0-47084400-1318673398_thumb.jpg

  • 3 weeks later...

Rota DPT's look nice!, what size tyre?

I was thinking about rota boosts in 18x9 +27, will i have any fitment issues without coilovers? S.2 automatic

Should be be pretty flush with the guards as its within 3mm of a R34 GTR rim, what size tyres are people running with R34 GTR rims?

cheers

darren

Edited by jet_r31

Rota DPT's look nice!, what size tyre?

I was thinking about rota boosts in 18x9 +27, will i have any fitment issues without coilovers? S.2 automatic

Should be be pretty flush with the guards as its within 3mm of a R34 GTR rim, what size tyres are people running with R34 GTR rims?

cheers

darren

A 245/40 /18 or 245/45/18 will have a virtually straight sidewall to a very slight amount of stretch, but will be just about spot on. I'm pretty sure 265/40 is factory fitment on a GTR 18" isn't it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...