Jump to content
SAU Community

Recommended Posts

I've seen it suggested that it's x100 mm Hg, ie 700mm Hg, which is slightly less than 1 bar (760 = 1 bar)

I think that's what on the cluster anywayz.

Makes sense..

I knew it was something like that.

Greg

the gauge is quoted in millimeters of heilium. This is a very old measurement which is pretty much obsolete. A stock HCR32 runs 10PSI of boost, this is what the actuator is set to, and what is displayed when you hook up an aftermarket boost gauge.

the gauge is quoted in millimeters of heilium. This is a very old measurement which is pretty much obsolete. A stock HCR32 runs 10PSI of boost, this is what the actuator is set to, and what is displayed when you hook up an aftermarket boost gauge.

No, it's millimeters of MERCURY, 700mm of helium wouldn't be much pressure :D

It comes from when pressure was measured by seeing how much mercury it moved in a measured glass tube. It is also called a 'torr' 1 torr = 1 mm Hg.

Edited by PlasticStan
either way you cut it the stock gauge is usualy wrong 1/2 the time anyways so just get a good aftermarket (not autometer) boost gauge and call it a day.

What's wrong with autometer? Autometer have been around for decades in the US and are made in the US.

I think you mean autogauge?

Greg

What's wrong with autometer? Autometer have been around for decades in the US and are made in the US.

I think you mean autogauge?

Greg

no i meant what i said, auto meter gauges are not as accurate as they tout.

my buddy with a rx7 had a auto meter gauge that said he was only boosting 7-8psi he threw on a greddy gauge (electric) and it showed boost to be more like 12.

just recently a buddy of mine dynoded his s13 hatch with a rb20 in it and the auto meter gauge read 11psi when it was really boosting 15.

from what ive been told the stock boost on a BONE stock gts-t is 7psi, however when the std exhaust has been dropped in favour of a highflowing one boost jumps up to 10psi.

From what you have been told is correct (sought of).

A stock R33GTST runs 7psi - RB25DET.

A stock R32GTST runs 10 psi - RB20DET.

RB20's and RB25's use different turbos, the RB25 (R33) turbo is slightly bigger than an RB20 (R32) turbo - therfore it can make more power at a lower boost level.

My R32 was running 10 PSI on my aftermarket Greddy Guage. After putting in a 3 inch turbo back egzorst it used to spike to 13psi and sit at 12psi all day - this is because the bigger egzorat is more free flowing and can get rid of gasses quicker - im sure on the exact technical term for it but thats what happens when you do egzorst mods to your car i.e: Air filter and egzorst.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...