Jump to content
SAU Community

Recommended Posts

Started my retrofit today. Morimoto FX-R projectors are almost the same as R32 projectors. Tapped one corner and drilled the other, went straight onto the adjusters. Tap: 5mm dia 0.8mm pitch (M5x0.8). Need AMP to D2S straight adaptors, which I didn't order beforehand so my retrofit is on a hold :(.

  • 2 weeks later...

So finished up at 3am lol started at 11:30pm

Standard R32 - Morimoto FX-R

dyo5c7f.jpg

KOmNhYW.jpg

Tap this existing hole with M5x0.8mm

CZuWjbO.jpg

Drill then tap the bottom right hole

ztmYA3S.jpg

What you end up with

Jbqv6cL.jpg

fnwkYwy.jpg

As you can see, the FX-R is a bit shorter than standard. You can make up a mounting plate to offset the difference, but the gap doesn't bother me.

9whbRFz.jpg

4300K cheap bulb and cheap LED parker. Note the parker is more than 6000K i.e. blue

ixRsBPD.jpg

Need to adjust it a bit more. The hole you drill will determine the angle of the beam as well. When I do another set I'll put more effort into where to drill the hole.

8TuSZQq.jpg

lg8pi0K.jpg

Crap picture, but they are so much more better than standard R32 projectors, as expected. Can actually see the road.

wCTRhKb.jpg

I'm going to put the fault with the bulbs for the uneven spread. High beam is awesome.

I've kept the standard halogen high beam so I can flash during the day. But when the shield drops, you can barely see the halogen. They are 85W, which I'm assuming is factory as both my projectors has them.

Edited by niZmO_Man
images rehosted
  • 2 weeks later...

Here is a crappy pic of the second set I did. Painted the cover thing to make it look like R31 style :P

wAZDmnn.jpg

 

On 25/03/2013 at 11:17 AM, BWRGTR said:

awesome work, do u know if there are any options with N1 headlights, i believe it uses reflector rather than projector?

perhaps fog lamp in headlight can be done as a projector

Get a pair of projector headlights and sell your N1s (they are more valuable). You can retrofit the Morimoto Mini H1 (or D2S) into reflectors, but pointless really.

  • 2 months later...

I will be doing this to my R32 headlights when I get the chance (when I get off my ass)

Does retrofitting these HID projectors onto the headlights make them LEGAL and still retain the self-cleaning/adjusting mechanism?

They don't have self leveling, hence the cheap price. If you want OEM spec, be prepared to pay $1k+ for used headlights + parts. You will then have to put the squirters on your bumper (self cleaning). Self leveling is built into the projectors so it shouldn't be too hard to wire up.

^ I guess if they are smart enough to realise that it isn't stock. Some r32s had OEM projectors and others just non-projector types. You could feign ignorance saying it was stock OEM projectors but upgraded bulbs.

But seriously I have the stock crappy non-projector type - and nowadays I reckon I'm the odd one out coz I'm surrounded by projector types...

Yep. You can fit all the auto leveling and squirters, then have it engineered and they can still defect you.

But you're better off doing a retro with a Morimoto projector and 4300K bulb. Just aim them properly. Much better and far less glare than putting HID kit into a halogen headlight.

If you put anything higher than 5000K you deserve to get defected. Same goes with higher wattage. 35W is plenty, if you need more and you're driving around town, you need new glasses or stick to daytime driving.

Remember ALL OEM HIDs are 35W and have 4200-4300 K bulbs (unless you have a Merc, I believe the S class comes with 5000 K Osram bulbs).

^ I guess if they are smart enough to realise that it isn't stock. Some r32s had OEM projectors and others just non-projector types. You could feign ignorance saying it was stock OEM projectors but upgraded bulbs.

But seriously I have the stock crappy non-projector type - and nowadays I reckon I'm the odd one out coz I'm surrounded by projector types...

I've seen far more projector headlights than reflector ones on an R32, so you have an uncommon/rare car ;). Put some Blue plus 90 bulbs in, or grab a pair of projectors and retrofit them ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...