Jump to content
SAU Community

Recommended Posts

Hey guys, just go an apexi gauge from the states, and was wondering how most here mount their gauge?, im thinking of jst gettin a cup and mounting it behind the sterring wheel with the factory gauges, pics would help, jst need some ideas, the gredyy dual pillar mount sounds nice but too expensive for my liking

i got mine on the steering column.

i got pulled over once and defected for various things. the cop said if id had my gauge on the pillar he could of done me for that to.

im not sure if he was full of it or not but, food for thought

In victoria, a gauge anywhere above the dash line is defectable.

Not sure if it is relevent, but in my r32 my boost gauge is mounted below the leftmost edge of the instrument cluster. It looks pretty good there and with my aftermarket steering wheel you can see if perfectly (and its legal).

yeah i have mine in a din set up i made my self and it the best because the cops dont even relise i have them cos they are aways looking for gauges afove the dash

it not thebest photo but they are under my air con unit

post-9917-1132794320.jpg

yeah i have mine in a din set up i made my self and it the best because the cops dont even relise i have them cos they are aways looking for gauges afove the dash

it not thebest photo but they are under my air con unit

What use are gauges there...?

the cops dont even relise i have them cos they are aways looking for gauges afove the dash

it not thebest photo but they are under my air con unit

Yeah, they wouldn't notice that monster tacho at all :D

Another option...

I've seen pics where the cigarette lighter on a R33 has been removed and the boost guage installed in it's place (obviously the console needed to be modified slightly to fit the guage).

It's probably not the best location from a visual perspective when driving, but it looked neat and it's legal. I liked it :D

No offence, but the laws aren't nearly as bad here, and most things go around here........im in new zealand.

I want to place it somewhere practical and neat....imdefinitely going for a gauge cup though.........

Another option...

I've seen pics where the cigarette lighter on a R33 has been removed and the boost guage installed in it's place (obviously the console needed to be modified slightly to fit the guage).

It's probably not the best location from a visual perspective when driving, but it looked neat and it's legal. I liked it :rolleyes:

I have my boost gauge where the cigarette lighter used to be. I had to get the Dremel out to widen the hole but it looks nice and flush.

I also have my turbo timer hidden in the Ash tray. once again the dremel came to the rescue.

Yup also have mine where lighter used to be..had to widen hole but it looks neat and the best thing i foudn was you could wire the gauge up to the wire(cant remember what colour now) that was in the lighter so when you turn your headlgihts on your gauge lights up =]

although bad side is cant see it for shit unless you look around gearknob when in 3rd gear, was quite annoyed at myself for not thinking about that before i put it there =[

I accidently wired the wrong wire up so as soon as I turn my car on the boost guage lights up. =)

Yeah it is in a awkward position, but really, are you constantly looking at the guage. I'd be worried if you were =) lol.

Another option...

I've seen pics where the cigarette lighter on a R33 has been removed and the boost guage installed in it's place (obviously the console needed to be modified slightly to fit the guage).

It's probably not the best location from a visual perspective when driving, but it looked neat and it's legal. I liked it :P

Mine's there...

Also removed my ashtray, and made an alluminium plate to mount my ebc right in the centre of the hole that was left when I took my ashtray out.

Pics are a bit crap, were taken with my phone.

post-10239-1132823091.jpg

post-10239-1132823120.jpg

ok this has really left me blank so ill ask it anyway

whats the point of an aftermarket boost guage in all honesty?

do you watch what the guage is saying while you are driving?

does it say anything different to the stock guage in the r33 cluster?

how are you managing time to read the guage while driving if so, you should be looking at the road???

paul, the stock guage isnt exactly accurate (on my car anyways)

also i like to have it there cause if anything does go wrong with the boost... e.g it spikes to 20psi for some reason or something i can see it :P

ok this has really left me blank so ill ask it anyway

whats the point of an aftermarket boost guage in all honesty?

To monitor boost more accurately.

does it say anything different to the stock guage in the r33 cluster?

Yep, it does. I can't for the life of me tell where 14psi is on it.

do you watch what the guage is saying while you are driving?

No. But on the dyno I do.

how are you managing time to read the guage while driving if so, you should be looking at the road???

Don't look at it on the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...