Jump to content
SAU Community

Recommended Posts

Hi all

I cant get my wheel locknuts off...dont have the key, gota recheck with guy i got car from...went 2 bob janes 2day 2 c if they could get them off and no luck, then went to the distributers to see if they have spare keys to fit n still no luck. last resort will b 2 chisel them off but might scratch rims...

not sure what type, but its round on the outside and the inside is a 4 point star thing with a thin groove and bubbly (lol) ill get a pic up here tomm...

can any1 help/know any theives who've had expierence in this? lol

Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/
Share on other sites

Except by the sounds of it he has the ones with the internal key which are harder to get off.

But as the others have said, the usual way to get them off is to mash a socket onto it and get it off that way. I had to do that on my SS cause it didn't come with the key for the lock nuts when I bought it.

Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/#findComment-1769293
Share on other sites

Hi all

I cant get my wheel locknuts off...dont have the key, gota recheck with guy i got car from...went 2 bob janes 2day 2 c if they could get them off and no luck, then went to the distributers to see if they have spare keys to fit n still no luck. last resort will b 2 chisel them off but might scratch rims...

not sure what type, but its round on the outside and the inside is a 4 point star thing with a thin groove and bubbly (lol) ill get a pic up here tomm...

can any1 help/know any theives who've had expierence in this? lol

Show us a pic mate, sounds similar to the BMW wheel lock nuts..

Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/#findComment-1785028
Share on other sites

I had the same problem last week, it took ages to get mine off.

What i did was drill straight down the centre of the stud, with a drill piece almost the same size as the stud, then chiselled as much of the lock nut away as possible, then i jacked the car up and pulled and shook on the rim, then eventually it loosened itself.

After spending days and nights on doing this, cutting up my hands and putting minor scratches on the rim trying to work out ways to get the piece of shit off, i was sitting in the car just looking through stuff and yep you guessed it.......The lock nut key was in the centre console the whole time. :) Ah well

oh yeah my lock nut is the same style as yours too.

Edited by CNFUSD
Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/#findComment-1790266
Share on other sites

Had the same problem with mine when 1st imported....needed new tyres for blue slip.

Bash job worked ok.

Find the smallest socket that will slide over it and then go the next size down from that.

For me, once i had selected the size, went to Cash Converters and bought the same size socket for 50c and used that one instead of a good one.

Bashed it on as far as it would go, which wasn't very far, then heave ho!

Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/#findComment-1790280
Share on other sites

vange, just get a cross-bar and hammer the closest size to the lock nut over it. It will come off in 2 seocnds flat. Or take the car to a McLeods or whatever and get them to do it - they do it all the time.

Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/#findComment-1792681
Share on other sites

that sucks CNFUSD, all that work 4 nothing....u think urs would fit?

I dont think the chances of mine fitting would be to good, so id say that you would be better off doing what i had to do, or if you can still drive take it to a tyre place, i didnt have that option cos it went flat on a saturday night, so i had to get the thing towed hm.

Good luck

Link to comment
https://www.sau.com.au/forums/topic/97436-wheel-lock-nuts/#findComment-1793952
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...