Jump to content
SAU Community

R32 GTS-t frontcut bits

R31 POWER
 Share

Recommended Posts

  • 2 months later...
R31 POWER Mentor

R31 POWER

Posted
  • Author
Posted

Miss_Nismo I don't have none of that sorry

Hey Kris,the bend is on one side and did'nt leak while in the cut but would be best get it pressure tested.Your more than welcome to come have a look.

R31 POWER Mentor

R31 POWER

Posted
  • Author
Posted

Yep I have the complete cable and lever,hows $10 sound? and you pay postage.

The rack I guess is fine since the front cut had no front/side damage.It might cost alot to send it over east thou.

I'll try and get pics tomorrow.

*Edit pics*

here's the bonnet cable

http://www.users.bigpond.net.au/r31power/R...net%20cable.jpg

Roy Grand Master

Roy

Posted
Posted

Im chasing a few bits and pieces:)

1. I need the cap off the power steering reservoir, complete with wire and plug that goes into loom. If you dont want to seperate from reservoir thats cool ill take the whole thing.

2. Window wiper motor with all the wiring you can offer.

3. The air con hose that comes ouf of the firewall, and runs along the chassis rail and bolts to the compressor. The hose is part alumium, part rubber with like a corrugated carbdoard sheath around it.

4. Clips and bits and pieces...any clips off the firewall you can remove that hold loom wiring, brakes lines, heater hoses etc etc in the engine bay are needed. Also the rubber grommets where the heater hoses, loom, passenger side brake lien etc etc go thru firewalls and guards...whatever you can throw my way.

Happy to pay you a bit extra for the trouble of carefully ripping this crap off...and i will be forever grateful:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • Duncan
      NC MX5

      By Duncan · Posted

      I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
×
×
  • Create New...