Jump to content
SAU Community

Recommended Posts

I signed up with these guys about a week and a half ago and I still havnt got an email from them confirming my account and I even sent them an email through the website troubleshooting bit and nada.

Oh I think this is my first post here so hi everyone.

Im pretty much looking at importing a soarer or a 32 without a broker, looking to have it as a second/project car and do compliance myself.

If anyone has any other good sites please point me over their, thanks.

Link to comment
https://www.sau.com.au/forums/topic/98315-motor-world-japan/
Share on other sites

I signed up with these guys about a week and a half ago and I still havnt got an email from them confirming my account and I even sent them an email through the website troubleshooting bit and nada.

Oh I think this is my first post here so hi everyone.

Im pretty much looking at importing a soarer or a 32 without a broker, looking to have it as a second/project car and do compliance myself.

If anyone has any other good sites please point me over their, thanks.

You may need to do some further research. You can no longer import an R32 under the 15 year rule - hence can't do the compliance yourself. It will need to be imported under the SEVS?RAWS scheme & good luck finding a workshop for that. As for the Soarer it needs to be 1988 or older, otherwise it is SEVS/RAWS. The problem with importing yourself is that some of the SEVS?RAWS workshops don't want to know you.

Hmmm, dam.

Okai I gotta read up on these rules a bit more, might be better for me to find a local one with a blown motor.

Because im planning on giving it a rebuild hence it being my project car.

Well you can be assured that there are plenty of R32's around, so have fun finding one. Buy a good one, not a cheap one.

Okai, so from what I can gather if i want to import a car that comes under the SEVS/RAWS it needs to be complied by a company thats been approved to do these compliances.

I searched through dotar and found a RAW that can comply soarers thats only about 10 minutes away from me.

So you are saying I cant do the work myself and pay them a fee to check over it and sign the papers?

So does this mean I can import any model soarer, say a 94 model and get the Registered Automotive Workshop to do the compliance?

Okai, so from what I can gather if i want to import a car that comes under the SEVS/RAWS it needs to be complied by a company thats been approved to do these compliances.

I searched through dotar and found a RAW that can comply soarers thats only about 10 minutes away from me.

So you are saying I cant do the work myself and pay them a fee to check over it and sign the papers?

So does this mean I can import any model soarer, say a 94 model and get the Registered Automotive Workshop to do the compliance?

Best bet is to give the workshop a ring and/or go and see them. Most shops that deal with the public have a website, so check that too. As for the models of Soarers they can comply it will really depend on what they have applied for. Again, easiest thing is to ring & ask.

prestige motorsport and import101(and others probs) have still got cars eligible for import under the 15 year rule. better hurry thou cos once these few run out thats it.

EDIT: the service fee for these 2 is around 1000 dollars which isnt anything for peace of mind and having it all done for u.

Edited by nisskid

Ascenion24 give Mark Hocking an email. I found he was much more responsive then motor world, and a lot of people off these forums have used him to import cars with great results, without using an Australian based middle-man.

I have used Motor world myself twice, the first time through a broker and the second time I already knew one of the guys there so importing a second car myself, wasn’t a problem. They may be funny about dealing directly with the public. I find this strange because a long while ago a person there was telling me they were going to open a new website to sell directly to anyone.

http://www.mytrading.org/

Edited by noise
prestige motorsport and import101(and others probs) have still got cars eligible for import under the 15 year rule. better hurry thou cos once these few run out thats it.

EDIT: the service fee for these 2 is around 1000 dollars which isnt anything for peace of mind and having it all done for u.

How do you get piece of mind when they make you sign a form voiding all responsibility they have towards your car and you?

How is it less of a gamble then buying directly off the people they buy off?

By they do everything for you, you mean they send a couple of emails?

Edited by noise
Ascenion24 give Mark Hocking an email. I found he was much more responsive then motor world, and a lot of people off these forums have used him to import cars with great results, without using an Australian based middle-man.

I have used Motor world myself twice, the first time through a broker and the second time I already knew one of the guys there so importing a second car myself, wasn’t a problem. They may be funny about dealing directly with the public. I find this strange because a long while ago a person there was telling me they were going to open a new website to sell directly to anyone.

http://www.mytrading.org/

Agreed, give Mark Hocking an email. His service is second to none, and will buy you an awesome car! He will put that extra effort in to get exactaly what you want.

You will not regret it, I too got in contact with him through the reputation he has on this website and he has certainly lived up to it.

Good luck.

How do you get piece of mind when they make you sign a form voiding all responsibility they have towards your car and you?

How is it less of a gamble then buying directly off the people they buy off?

By they do everything for you, you mean they send a couple of emails?

Bloke, I know you have issues with brokers, but please don't tar Danny (Imports101) with the same brush as Geoff (Prestige Motorsports). To be clear (& to follow the forum rules) I have had very good experiences with Danny when it comes to standing by his guarantee that the vehicle delivered matched the desciption sent. There was a problem not of his making, but he fixed it.

He also sorted the transport, customs, compliance, rego - basically everything. For some of us the money spent on a broker is money well spent - not least because for me it means I don't have to take time off work to go & sort details & move cars & jump through all the other hoops that you need to to get an import on the road.

One final thing - the number of SEVS/RAWS workshops for some models is very limited. They may not necessarily be too happy about missing out on the brokerage work. So they may not want to comply your car for you. It would pay to make sure you have found a compliance workshop BEFORE going either direct from Japan or through an independent broker.

Edited by djr81
EDIT: the service fee for these 2 is around 1000 dollars which isnt anything for peace of mind and having it all done for u.

just remember that you are paying the service fee of $1000 on top of the fee charged by the japnese supplier (usually around 100K yen). Just make sure you are getting some value for your fee.

How do you get piece of mind when they make you sign a form voiding all responsibility they have towards your car and you?

How is it less of a gamble then buying directly off the people they buy off?

By they do everything for you, you mean they send a couple of emails?

because people in Japan have actually seen the car, not like blindly buying off some site and hoping it isnt a scam. And by piece of mind i also mean they take care of all the work for u, shipping etc.

and seriously have u been through the process u twat?? if u have then u should know that they take care of shipping, payment and they give a slight inspection of the car in Japan, not just send a few emails.

Bloke, I know you have issues with brokers, but please don't tar Danny (Imports101) with the same brush as Geoff (Prestige Motorsports).  To be clear (& to follow the forum rules) I have had very good experiences with Danny when it comes to standing by his guarantee that the vehicle delivered matched the desciption sent.  There was a problem not of his making, but he fixed it.

He also sorted the transport, customs, compliance, rego - basically everything.  For some of us the money spent on a broker is money well spent - not least because for me it means I don't have to take time off work to go & sort details & move cars & jump through all the other hoops that you need to to get an import on the road.

One final thing - the number of SEVS/RAWS workshops for some models is very limited.  They may not necessarily be too happy about missing out on the brokerage work.  So they may not want to comply your car for you.  It would pay to make sure you have found a compliance workshop BEFORE going either direct from Japan or through an independent broker.

You need to get your facts straight.

I never said anything specifically about imports101 or prestige; my comments were about brokers in general.

Japanese supplier organises transport not the broker.

Customs broker organises customs not the broker.

Compliance workshop organises all things relating to compliance not the broker.

Your entire post is just a made up story with no substance.

The end.

Edited by noise
because people in Japan have actually seen the car, not like blindly buying off some site and hoping it isnt a scam. And by piece of mind i also mean they take care of all the work for u, shipping etc.

and seriously have u been through the process u twat?? if u have then u should know that they take care of shipping, payment and they give a slight inspection of the car in Japan, not just send a few emails.

Do you think your Australian broker goes to Japan and inspects each car?

LOL

Read my post above this as it answers most of your delusions.

Cheers

These next few lines should break it down for those who are a little slow at understanding whats being said.

I myself imported the first time through a broker with great results.

I myself realised that the broker actually did nothing for me and imported a second time without a broker with great results.

Both times involved almost exactly the same amount of effort.

Both cars were bought from the same supplier in japan.

Importing myself saved me $1100.

Do we understand?

Edited by noise
Do you think your Australian broker goes to Japan and inspects each car?

LOL

Read my post above this as it answers most of your delusions.

Cheers

i mean like u get a run down of condition of the vehicle and stuff, and they organise and consult with the supplier which in turn organises it. why do people have to be such d*cks on forums. if u were like this in the real world ud be laying on the pavement with a foot in ur ribs. owell be a pathetic little chum.

  • 1 month later...
You need to get your facts straight.

I never said anything specifically about imports101 or prestige; my comments were about brokers in general.

Japanese supplier organises transport not the broker.

Customs broker organises customs not the broker.

Compliance workshop organises all things relating to compliance not the broker.

Your entire post is just a made up story with no substance.

The end.

Late reply, but I don't really want to let this go through to the wicket keeper.

You may have not differentiated between the two import companies (Imports101 & Prestige) but I do - simply because I have used both of them & Imports101 stood by their guarantee when the delivered car differed from the description provided by the Japanese supplier. It wasn't a problem of their making, but they fixed it...

Imports101 is both a broker & the compliance shop - hence your distinction between the two is not always necessary. The advantage of this arrangement (not uncommon) is that it provides a link between the purchase of the vehicle & compliance of the same. If your broker & your compliance shop are different & you strike problems it is easy to get stuck in the middle & out of pocket. If they are one and the same & offer a service guarantee you should not have a problem. I made the distinction because in my opinion having the broker and the compliance shop as one greatly reduces the risk of something going wrong.

My other point stands. I could make the arrangements for customs via a customs broker, transport, etc etc etc, but to do so means time off work & a heap of travel. I have done this before & I much prefer to allow others to do the work for me.

Lastly, under the previous scheme it was quite common for compliance shops to refuse to do compliance work on cars they did not import themselves. So you may well save $1000 on brokerage fess, but that doesn't help much if no one will comply the car for you.

My facts are straight. :D

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...