Jump to content
SAU Community

Recommended Posts

Which wiper blades have people successfully replaced theirs with in an R33?

Mine are getting very sticky and crap and I think it's time to replace them, but funnily enough can't seem to find a specific blade for the R33.

Jason.

Link to comment
https://www.sau.com.au/forums/topic/99162-wiper-replacement/
Share on other sites

I got some from supacheap, they were like universal fit had fins for 3mm and 6mm or something like that, was a whil ago. But they work excellent. They were called "Big Grey", got them because my paint is GMG, there are black or there are a few different coloured ones. Cheap too.

Yeah I've seen those "Big Grey" ones too. Big W sell them also, they even sell them in a set of 3 so you can replace your front ones as well as your rear one. I got me some blue ones! Looks pretty shmick, but they are more expensive than the regular black ones. I think most of them are all a universal fit aren't they?

"Me fail english? That's unpossible!"

Edited by MacGuyver

The only comment on wiper blade that matters is Buy steel backed ones!! why? coz they actually keep working to a r.w.c standard longer than 1 weekend. Plastic ones can't apply the same pressure between blade and screen and after a short period are no longer effective, making them defective!!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...