Tangles

ears are important hence why I recently watercooled my 55db PC

yeah thats about the mark. that and the oil cooler from Alex cimm cost under 300$

I think Ive got that on CD somewhere along with Fast

greddy (grex) oil relocation kit is around $150? from Nengun i use it, so does mr.mod

stock is good for 400hp easy if you replace it, you'd want a GOOD brand name Jap item, not a no-name ebay/chinese special as it'll split within weeks, undoubtedly.

search Yahoo Japan for bits n pieces (wont find stuff in shops) and ask Slidewize (trader section) to bid for them on your behalf change the tyres, if AWD, to be equal, or you'll have an Very Expensive attessa repair issue

9 X 425 = 3.825 GHZ 1700 FSB 1.45V to CPU new P5E-X38 mobo yeah, will add the other radiator, just didnt want it outside the case (oh well) should crack 18000 3dmarks

yeah thought so better rejig it and add the external double radiator/fan system (its a 745 system, but only setup the small single radiator) the 2900xt's used to see 100degrees on air (stock) on load, so the water has brought them down by 35degrees

3" is stock jippa so go the 3" route

query: Q6600 @ 3.60 ghz (2.4 stock) G0 stepping model 2900xt (two-off) with coolermaster glacier-600 water cooling thermaltake bigwater 735 70degrees core 0, 69 core 1, 67 core 2, 66 core 3 on full load is that too hot? bearing in mind the graphics cards idle at 49degrees runs at 47-44deg on idle pump - cpu - pcie - pcie - radiator - reservoir - pump had a nth bridge water block as well, but not on atm might have to refit it along with the double radiator - just that the extra radiator has to sit outside the case

injectors, dump, turbo - 1grand perhaps for a "quick" sale ?

good luck Im waiting for my chip to be mapped, and the chip adapter to arrive from japan once thats all sorted and a tune/map is written on the chip, I'll get my safc/sitc adjusted for hopefully the final time. with the remap Im hoping for 205awkw / 215rwkw

can you hear a tick tick tick from 4500rpm up?? if so, thats detonation........

+1 sits fine in the crnr

search in this section for "Mearcat" he makes custome guage pods for the stagea looks very good

I get a click from stationary to slight acceleration in 1st gear only only ever since the shift kit was installed no issue IMO

damn its always the way, selling the vehicle and it suddenly needs major repairs, thru no fault of your own bad luck leshy hope it sells soon, as its very tidy just wondering if the kms are scaring off buyers? shouldnt......................

the only noise I get is a click from either the gearbox, since shift kit install, when starting to move in 1st. a little click. real happy with my stag, clean and tidy, good condition. definately a bargain @ 18k almost 3 yrs ago now

Looks like everything is sold

yah okies

deatschwerks in USA do the best hiflow injectors out there (so I hear)

+1

safc fitted tuned $600 highflow the r33 turbo, 360degree journal (bush) bearing with max oversize inlet/outlet, steel wheels, $1300 dont need injectors etc, but yeah youd want 2k minimum for some sort of turbo highflow (GCG are $1950 alone, and you'll want/need some sort of ecu tuning like a safc piggyback) with a highflow, adj.fpr, z32afm, fmic, 040 bosch pump, 3" exhaust, 2x piggybacks (safc/sitc) I get 190rwkw from a basic tune at 12psi.

my middle sox just rocked!! Im using 350mm 1front and 1rear looks good, not too low at all.

back to the top anyone after bigger RB25det injectors?