Duncan

well I've got a 32 in pieces in the garage, and both front and rear passenger side shafts are about 600 long, definitely neither is 570ish

+1 Chris at Craved Coatings is the man for this job, I've had him coat heaps of things for me and he has always been good and reasonably priced. And he'll be able to sort the stickers too.

frankly, I'd try somewhere else....

Yep 4 wheels for $2k although getting them to Adelaide would be painful and not cheap I guess. Tyres are Yokohama A048s but they are old and bald

You can't use recent auction sales or landed prices in AUD as any sort of guide, the exchange rate has dropped by 15% in the last 2 months. Simply put, even if you can find a 35,000 R34 you will have to pay more like 45,000 for it this now. At the moment, every car in the country came in under a much better exchange rate, so we are probably in one of those unusual times where you will get better value locally than importing.

46 ABS teeth on a 32 GTR/GTS4 diff

Yeah I've got a 32 gtr diff handy. Other than # teeth what do you need?

well...the offset is important, genuine rays have stickers inside the rim with the specs, and sometimes marked into the back of the hub mounting they will go for about 500ea

Sway bar is gone too. Everything else is still available

Excellent post with lots of detail, I'm sure it will be useful to lots of other people.

Oh I see, all is explained. CA18 was not Nissan's high point in engine design....imagine it in auto pushing a 1.5t car around.

I am the only person on the internet that doesn't know what an "FR32" is?

Yes, the rule will change. All things are impermanent

actually mine too....while annoying every time I haven't bothered pulling it apart yet

I've been using gates belts for years on road and my race car with no issues. but anyway, that noise is horrible but almost certainly something rotating at the front. If I understood right you are saying the cam gear (intake in particular) is rubbing on the backing plate, that definitely should not happen. Also as Ben said that belt is dangerously loose and must be fixed ASAP, it is at major risk of skipping one or more teeth which can ultimately stuff your valves.

I am a bit old fashioned, but I suspect you are trying to buy wheels in Sydney. I am selling some.

well congrats to RTDC on taking out the championship then, I take it the bonus points relate to their choice to keep the same cars round to round which seems fair to me Also I think SAU should be proud of coming home second, we had great involvement across a lot of club members, and I bet everyone enjoyed the events. And considering there are 10 clubs competing across 4 rounds I reckon it is a pretty serious competition so 2nd is great outcome. And finally, well done to Nulon for creating and sticking with this concept....everyone go out and buy their oils!!!

Awesome response from DBA, great to see

yeah look actually I guess it was OK, more just that I'm not so familiar with the tricks. I had trouble with the steering rack but could have done it differently/easier no doubt. Now it's out it was easy to remove the box, flywheel, clutch and change the rear main seal also had the grumpy old man around today, the extra pair of hands made it much quicker to get the rear subframe apart and off

It was too slow. And to be honest I'm not sure of the allure, 34GTT is cheap enough these days surely; the import cost is more than the auction cost.

Look basically what you are trying to do is not safe or roadworthy. 4 or 5 degrees of camber is way too much for a road car and will dramatically reduce your braking ability. Further, even if you can get the wheel to tuck into the guard, the actual ADRs say the whole wheel has to be within the guards, not just the top when compressed. So do be surprised that people aren't super supportive of your plan to wreck you car and endanger yourself and others. Having said that, a key thing both people who said they got close to having this size wheel said was that they used GTR guards which have significantly more space, you definitely need to do that. GTR guards also need new headlights, front bumper, and a few other bits. Next, you should run as little caster as possible (will also make your car handle worse) to keep the wheel from hitting the front of the guard at the tightest point. And yes, you could run really short upper arms which would help it tuck in, and you will need to remove the inner wheel arch guards. The next point of clearance if they are far enough in is likely to be the swaybar, so I guess you could remove that as well (worse handling again). And the last thing I can think of would be to run undersized/"stretched" tyres (also illegal) to reduce rubbing as the wheel turns on either the inner or outer guard. But I think you are crazy to wreck an awesome car

Well, in a legal sense, there is no restriction about the country of origin for a model. Practically almost everything comes from japan because the buying and importing infrastructure is in place, and the total costs are much lower than coming from the UK. So its the same rules as always, if its on the SEVS register it COULD happen, as long as you can find a RAWS willing to comply it. A fair few top end cars come other than the usual skylines we all think of.

It may well be a band aid....but even if the issue comes back machinging is a cheap bet. There were more detailed responses about other areas it's worth checking. But overall, I guess I'm saying having to machine rotors every now and then isn't a big deal, even if there is an underlying cause. The exception would be if it goes out of round again quickly in which case I'd check it our more thoroughly

actually I thought it was the GSS342 because the inlet is on the bottom, like stock. they seem to be the same pump other than where the inlet fitting is (341 on the top, 342 on the bottom)

it could simply be a bad ECU, try another one? or even simpler, that the auto one was not plugged in correctly? There are also some differences among models for how the ECU power is supplied so maybe make sure it is the right ECU (check part# via FAST)