Search the Community

Hello guys and gals. I am currently searching for a front set of Alcon V8 Supercar 6 piston calipers to fit to my R32 GTR. They need to be in good condition, as i dont want to have to rebuild them or change seals, i just wana bolt them up and go. If anyone has any, or if you know of anyone who has some that they are willing to part with, id be more than interested to have a chat. Contact me on here, as i am on here regularly. I know what they are worth and i have cash ready to go, so show me what ya got. Cheers, Damo.

R34 Alcon Brakes Hey all, Bought an R34 GT-T with the Alcon/Grex 4 piston brake set and 330mm discs. Running Pagid RS4-2 pads and I tell you what, you hit the skids and you well and truly know about it. Problem I have got is just had the front discs were warped slightly so had them skimmed but now they at at their minimum. Can anyone recommend a good brake place that I can get new discs from to fit? I dont know enough about brake compatibility, do I need to get them from the Alcon Website and order a set from Europe or can any brake place get me a set of discs to suit? Any advice is valued!! :-)

I have for sale a full set of Alcon / Grex brakes for R32/33 GTR Front discs are 356mm, almost new and have no wear Rear discs are 315mm, and have a slight bit of wear Front calipers are fitted with Ferodo DS2500 pads and are about half worn Rear calipers are fitted with Pagid blue and are pretty new This is a full GTR set up, awesome stopping power This kit was removed from a high spec R33 in the UK, to be replaced with a full R35 set up $3750 NZD or near sensible offer [email protected] +64220447802

Hello, I have a full bolt on kit for 32,33 and 34 gtr. X2 380x40mm ap disc X2 355x32mm ap disc X2 Alcon racing 6 piston caliper, titanium pistons, monobloc. X2 Alcon racing 4 piston caliper, titanium pistons, monobloc. X4 pads front. X4 pads rear. X48 ap racing T-bobbin kits. X2 front hats. X2 rear hats with park brake provision. X2 front dog bones. X2 rear dog bones. X8 12-point caliper bolts. Price $8000 The ultimate brake kit for track dutys like timeattack, spare hats and discs available at negotiations. Can post world wide.

BRAND NEW IN BOX *Ideally would like to sell in N. America, but willing to sell abroad if you have a friend in the US able to facilitate. Endless 6 POT/4 POT Racing BBK Part# ECFXBNR34 (R34 GTR) 6 Piston Front Calipers, 4 Piston Rear Calipers 370mm x 34mm Front 2-Piece Floating Rotors 332mm x 30mm Rear 2-Piece Floating Rotors Blue Mounting Brackets, MX72 Brake Pads, Endless SS Brake Lines, Fasteners Calipers are Alumite Racing Finished (Super Hard Anodized). Rotor hats are TUFRAM coated. The bronze finish on the rotor friction surfaces is a break-in coating. The non-friction rotor surfaces are super high temp coated. These are direct fitment for the R34, and will fit the R33 and R32 with minor modification by drilling out the hub caliper bolt holes to 14mm, or using thread inserts in the brackets. This is an $8k (USD) setup before shipping and duties. It would take over a month to get (USA) if ordered today. Asking $7200 (USD). Located in Orange County SoCal. Contact: PM Payment method: Cash, Zelle, PayPal (contingent) Shipping: Yes, buyer pays all fees. Local meet up in public. Reason for selling: Going with a different setup I've been a member of this community since 2006. I can provide stateside references if necessary. JC

Top Quality Parts for GTR, clearout of all items!!! Race brakes, coolers, wastagates, etc Sell off of some of the remaining items that was going on my street/circuit GTR. Circumstances have changed so I want all this stuff gone. Prices have some room to move. I ask that you please be patient with asking for photos etc and I will do my best to get back to each enquiry as quick as I can. No paypal, bank transfer only or cash pick up. I can post anything but at buyer cost. Located in Adelaide SA, 0456969001 Trust T78-33d with 14cm housing, used $800 Trust 17cm housing, new $200 (suit T78) Trust 24cm housing, new $200 (suit T78) Bell Intercooler, top quality made in the USA, custom design 4.5" thick 28" x 12.3" with 3" inlet and outlets, tested to 50psi, new $1200 C & R Racing radiator, top quality made in the USA, custom design, this is same company that make radiators for NASCAR, very high quality new cost was insane, Denso core, twin SPAL thermo fans with shroud, Adel Wiggans clamp inlet/outlet, new $1500 Tial 44mm MVR external wastegate, x2 available, new $400ea Tial BOV, new $300 Brake Kit (will not seperate) $6000 V8 Supercar Alcon calipers, used but with complete rebuild kit supplied Pads, front and rear 25mm thick, new Alcon discs, 379x36 front and 355x36 rear, new

Best ap racing calipers Have a few sets of ap calipers. See photos, 6 pot, monoblocs with open swing bridge for fast pad change. Up to 390mm rotor capacity, minimum 340mm. Top calipers $2800 per set Bottom calipers $3100 per set. Post world wide. Rotors available. PH 0431113255.

Hello, If anyone has missed out from last time, I have some brand new cp5095 Only 2 sets available. Won't last long. Can supply rotors, hardware and machining to suit any application. $3700. Ph: 0431113255.

Regretfully I have up for sale a set of V8 supercar alcon front calipers. I had purchased them off bigmikespec earlier last year with the intent of putting them on my track car, but unfortunately I need the cash. As per bigmikespec's thread, these won't require a rebuild and can take a massive 380mm rotor. There are also plenty of ex-supercar rotors and pads going for cheap if you take the time to look around. They have just sat in a box in my shed since I bought them. bigmikespec's thread from last year: http://www.skylinesaustralia.com/forums/topic/423517-v8-supercar-alcons-front-pair-2k/#entry6815222 Asking for $2000 which is what I paid for them. Postage at buyer's expense, not negotiable.