Jump to content
SAU Community

Recommended Posts

I have available genuine HDI(Hybrid Development International) front mount intercooler kits.

There are 3 different types to choose from:

1/ HDI GT spec kit (core - tube and fin - 600x300x76) - $630 delivered.

2/ HDI monster kit (core - bar and plate - 600x300x76) - $600 delivered.

3/ Hybrid RS spec kit (core - tube and fin - 580x295x95) - $730 delivered.

Available for -

SKYLINE - R32 GTST - R33 GTST - R34 GTT

SILVIA - 180SX - S13 - S14 - S15

GTiR - RNN14

EVO 4 - 5 - 6 - 7 - 8

WRX - GC8

SUPRA - JZA80

KIT INCLUDES:

- Polished intercooler

- Polished aluminium piping (silver only)

- Stainless Steel T-Bolt clamps

- Mounting brackets and bolts

- Silicon hose joiners. (blue)

- 12 month warranty

Hybrid%20driftspec_1.jpg

Also Available -

HDI front mount intercooler cores (with polished end tanks).

1/ HDI GT spec core - tube and fin - 600x300x76 - $400 delivered.

GT%20spec.jpg

2/ HDI monster core - bar and plate - 600x300x76 - $320 delivered.

bar%20and%20plate.jpg

3/ HDI RS spec core - Hybrid RS spec core - tube and fin - 580x295x95 - $440.00 delivered.

PIPING KITS NOW AVAILABLE.

SKYLINE - R32 GTST - R33 GTST - R34 GTT - $450 delivered.

Kit inclusdes:

- Polished aluminium piping (silver only)

- Stainless Steel T-Bolt clamps

- Silicon hose joiners. (blue)

- 12 month warranty

OTHER VEHICLES - PM me for more info.

:)

Link to comment
https://www.sau.com.au/forums/topic/101027-hybrid-front-mount-intercooler-kits/
Share on other sites

  • Replies 123
  • Created
  • Last Reply

Top Posters In This Topic

1/ Hybrid GT spec kit (core - tube and fin - 600x300x76) - $740 delivered any cheaper if i buy 2 at the same time ? like a mini group buy

1/ Hybrid GT spec kit (core - tube and fin - 600x300x76) - $740 delivered any cheaper if i buy 2 at the same time ? like a mini group buy

PM sent.

HI,

I am interested in the Hybrid GT kits, either 600x300x76 or the 450x300x76

are there any performances different b/w the two?

I want the 600x300x76 but i would think the 450x300x76 would fit better without extrmely modify my front bar.

and about this piping,

do i have to cut the blade of my fan to fit? heard issue about thse piping.

how tite are they to th fan blade?

1 last question,

If i can pick up from Sydney,

any cheaper?

40 bucks off?

thanks,

darrien

hi gR33ddy. i am also after an intercooler kit for my R33gtsT. would like to know the difference in the two you have available? also is it a very straight foward connection? ie straight bolt on?

let me know.

thanks

2Gs

for the record. I dont sell used items unless specified.

Exchanges as with most places have time limits.

In this case, an exchange was offered 2 months ago but was declined.

Unfortunately 2 months later to exchange an item far exceeds that time limit.

bawahahahaha

you cant apply terms and conditions to a sale after its made.

fact you've applied no terms and conditions to any sale therefore leaves you open to anything the customer could request.

however, considering i've made a purchase of a product over $40, i'm then provided with a 12month warranty by law.

fact you've also provided no receipt or invoice of purchase, you've opened yourself up for the office of fair trading to look further into your business. however, i can prove that i have purchased the goods from you per PM's that have been sent back and forward.

Ohh and I declinded to return the product under the fear you may not even send me a intercooler back in exchange for the used one you sent me.

For those that aren't aware.... the intercooler I received had scratch's on the bottom and top of the intercooler (this is in no way capable of being done through postage) as well as 2 small pebbles/rocks in between the metal fin things. A fair few fins had also been bent on both sides of the intercooler. the way these fins were bent were not able to be done through the postage system.

i'll take photo's tonight and post them up for those that asked for them.

Here are the images I took on the day it was delivered here to my work.

I borrowed the digital camera here at work and took photo's of it.

Box was delivered to reception. I opened it right there in front of reception on the day it arrived and took photo's straight away at the time I noticed the dints in place.

john_004.jpg

john_003.jpg

john_002.jpg

john_001.jpg

Should have returned the cooler when you were given the chance i say. But I can vouch for gR33dy i ordered my part and arrived to me as per description without a prob. I think this may be a middleman dilemna more than anything else. Hope everything works out well for the both of you. I think being threatening is not the best way to go about it. Im sure there is a explanation.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
×
×
  • Create New...