Jump to content
SAU Community

Recommended Posts

'92 R32 B20DET

R33 series 2 turbo

600x300x76mm front mount intercooler

Standard ecu

Standard injectors

Walbro 255 fuel pump

GREDDY profec b spec 2 electronic boost controller

BIG HKS air filter (pod)

3 inch catback system

Done by BPS

173.6 kw @ the wheels

'92 R32 B20DET

R33 series 2 turbo

600x300x76mm front mount intercooler

Standard ecu

Standard injectors

Walbro 255 fuel pump

GREDDY profec b spec 2 electronic boost controller

BIG HKS air filter (pod)

3 inch catback system

Done by BPS

173.6 kw @ the wheels

RB20 silvia,

Built By Desynz Motorsport Concepts

GT30-40

550cc injectors

Sard pressure reg,

Microtec,

Standard Internals

Standard, crank, rods, pistons, headgasket, etc

reground camshafts,

HKS cam gears,

3" Exhaust

Desynz fabricated exhaust manifold

48mm Turbosmart wastegate

Greddy EO1 boost controller

Desynz FMIC

etc etc

389hp @ wheels on 19psi 100 octane fuel 30 Degree day (256.7 rwkw)

post-33361-1174084830.jpg

Edited by Desynz Motorsport
  • 4 weeks later...

1990 R32 GTST

Stock Computer

Stock Boost

Stock Turbo

HKS Super Power Flow Pod

R34 GTR FMIC - Leak in intercooler piping LOL!

Full Exhaust split dump/front 3.5" piping

Bigger Cat

R33 GTR Water Pump

136.4kw

  • 2 weeks later...
  • 2 weeks later...

R32 gtst 1989 RB20DET

Standard Engine internals

Standard Fuel pump & injectors

Stardard ECU

R33 Rb25 Turbo

BOS imports Split Front and Dump Pipe

3" metal Car

3" Blitz Nur Spec R Cat Back

Blitz LM FMIC

Blitz SBC Spec S Boost Controller

Apexi Pod w Top stage Carbon Fiber air box

Some type of heavy duty clutch not sure what type in the car when i got it.

Greddy Adjustable Cam gear Intake * exhaust Not tuned NEED after market Computer.

think thats all they didnt put the high boost on so only equates to 176rw kw @ .8bar

probly could have got around 190rw kw with the high boost 1bar.

cheers simon

lastscan.jpg

1992 A31 Cefiro with RB20det (200,000km mileage)

Stock engine internals

RB25 turbo

GTR fuel pump

MINE'S ECU

SAFC 1

FMIC

dump pipe

Apexi open pod filter

2.5 inch front to mid piping 3 inch at the back end with HKS super dragger exhaust

using bleed valve to control the boost, boosting 1.05 bar

182KW / 244HP on wheels

215 RWKW on the cheap.

R32GTST standard motor.

T3/T4 High mount with 36mm external waste gate (ebay $580)

Just Jap front mount ($400)

Custom 3" front pipe with 2" waste gate pipe plumbed back into exhaust. (made myself)($150)

3" Cat back (came with car)

Malpassi 1:1.7 Rising rate fuel reg($190)

Bosch 044 (intank) ($214)

Blitz pod

Standard computer, injectors, coils (copper plugs gapped to 0.7mm), throttle body, afm etc.

215kw @ 20psi. 188kw @ 15psi. (gfb bleed valve)

Running safe afr's under 12.

post-32032-1179192214_thumb.jpg

Internally standard Rb20det

Garrett dual ball bearing 450hp turbo (same as a gcg hiflow, this is using a 33 comp cover)

RB26 PFC modded to suit RB20

Walbro 500hp fuel pump

Splitfire coilpacks

FMIC - cheapo

catback tanabe exhaust, punched out cat, standard front pipe/dump pipe

standard afm, injectors

running 11psi on turbosmart t-boost due to nearly maxing out injectors

soon to have front pipe, dump pipe, z32, 550cc inj and 18psi

post-23551-1179667701_thumb.jpg

New car 1993 R32 gtst old one written off

but Mods are

RB2.1lr

40thou oversize aries pistons

rb25crank

garrett gt3040r turbo

n1 oil pump and water pump

ported and polished head with 1mm oversized valves

hks cast low mount manifold

40mm hks waste gate

hks panel filter in standard airbox with cai

hks cams 264"s inlet and exhaust

hks cam gears

550cc sard injectors

sard fpr

3' zorst hks

nismo fuel pump

tune done on bp ultimate 98

engine had 1500klm's on it at time of tune so will get better

post-7066-1179725800_thumb.jpg

Hi guys,

I got my R32 GTST tuned the other day at South Coast Rotary in Warrawong NSW. It spun 260hp at 14psi with fairly safe A/F ratios on a mid 20's day. The mods are as follows:

-Standard RB20 internals

-HKS 2540 w\standard exhaust manifold

-Apexi AP Engineering Power FC w\hand controller

-Standard injectors and AFM

-K&N air filter w\cold air induction but no heat shield

-Bosch 040 pump and Nismo rising rate adjustable FPR

-NGK copper plugs w\heat range of 6

-Xtreme H/D cushioned button clutch

Really happy with the tune, totally streetable and nice and fuel efficient. Attached is the readout from the final dyno run.

All comments welcome

post-11287-1179737069_thumb.jpg

R32 GTST RB20DET

R32 GTR Front Mount

R32 GTR Injectors

Z32 AFM

Bosch 040 Fuel Pump

Blitz Pod Filter

3 Inch Turbo Back Exhaust

Apexi Power FC

GCG R32 High Flow Turbo With VG30 Rear Housing

HKS Adjustable Actuator

Turbosmart Bleed Valve

213.2RWKW

dynosheet.jpg

Edited by Dave69001

Datsun 120y RB20DET

Chipped ECU

Z32 AFM

GTR injectors with std fuel reg

Front mount cooler

Auto transmission - 5000rpm stall

GT35R 0.6 exh

Walbro - surge tank - Bosch 044

3" exhaust

24psi

Matt Spry - PITS

post-24062-1179912778_thumb.jpg

AFM and injectors are oddly maxing out. Picked up 45rwhp with the new tune. Transmission is being toughned up after not lasting on the dyno, lol. I cant wait to get it to the track. Shift point has now been lifted from 7300rpm to 7900rpm as it is still making power up there :domokun:

Cheers

Steve

Edited by RB120WHY

Make: Nissan

Model: R32 Skyline GTS4-T

YEar: 1993

223XXX kms

Compression: 165 - 175 across the board!

Modifications:

- FMIC

- K&N air pod

- Splitfire coilpacks

- Turbosmart Boost Tee

- 16 psi

- Fuel pressure regulator

- Sliding performance (highflow" rb25 turbo)

- 3 inch Dump pipe

- 3 inch Exhaust

- gutted cat

- Auto to man conversion r32 GT-R gearbox

- Exedy HD clutch (Pull type - i think)

- two BOV (pervious owner) *stock *atmo

- Apexi muffler

- Walbro fuel pump

- re-mapped ECU by mercury motorsport (newmarket)

- STOCK AFM, injectors, internals

158.5 kws at all four wheels

Tyres 40 psi

Temp unknown

4th gear

post-36695-1180428502_thumb.jpg

Nissan S13 RB20DET conversion

Chipped ECU

RB25 turbo

3" exhaust

600x300x76 FMIC

15psi

ACA rising rate fuel reg

on mercury motorsports dyno made 191kw (256hp) at the wheels.

on old tune 11psi with standard ECU made 150kw (201hp) at the wheels and ran a 13.5 @ 100mph with semi slicks and 1.8 60ft

havent had a chance to run with the new tune

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...