Jump to content
SAU Community

Recommended Posts

My Jim Berry clutch is for sale. EASILY holding 265kW and still going strong. What no-one's mentioned is how cheap it is to have Jim rebuild them back to BRAND NEW SPEC.

$450 tops!

I want $550 ono for mine. Wont last long.

33 gtst.

Adrian

Wierd thought i posted this before but here it is again.

Direct Clutches in Albion Brisbane are one of australias premier places for clutches. Some of you might not remember the judge and his high hp cars, well he used direct exclusively.

And i dare say his cars where making more power and torque than 99% of users on here.

You will not be dissapointed :P

My Jim Berry clutch is for sale. EASILY holding 265kW and still going strong. What no-one's mentioned is how cheap it is to have Jim rebuild them back to BRAND NEW SPEC.

$450 tops!

I want $550 ono for mine. Wont last long.

33 gtst.

Adrian

ill take it alright.

  • 4 weeks later...
im quite interested in the amount of pressure (power) some of these clutches can hold up to.

im looking at putting out around 350kws atw and have been told ill need a tilton twin plate with custom flywheel. is this necessary??

You should call Jim. But he said mine should hold about 800hp at the fly fairly easy, its his superdooper single plate one. If you do all the conversions you still have head room. But just call Jim better to get it from the horses mouth.

But he said mine should hold about 800hp at the fly fairly easy

Jim usually rates HP on circuit applications so if you put slicks on the rears, rev it to 7000rpm & then dump it on a well-prepped track like Willowbank like I did, well....tore my carbonic down to the rivets. Ended up going to a NPC twin plate and it is bulletproof + only $200 to rebuild as opposed to $700 for a single plate.

Mine is ready to pick up from Jim now and i distinctly remember him asking me what i will be using it for even went down to percentages. EG:80% street, 15% circuit, 5% drag. So if you specify what you want to do with it he will give you what is necessary to do the job.

Deren

Edited by Godzilla32
Jim usually rates HP on circuit applications so if you put slicks on the rears, rev it to 7000rpm & then dump it on a well-prepped track like Willowbank like I did, well....tore my carbonic down to the rivets. Ended up going to a NPC twin plate and it is bulletproof + only $200 to rebuild as opposed to $700 for a single plate.

A mate with a 240awkw gtr got a heavy duty clutch (told it was good for 300awkw) off NPC and his first outing at the drags saw pretty aweful clutch slip.

I got jim's full monty, and upon asking him what it'll hold in my 26/30, he said it should see 1000+hp

Got a single plate Exedy sports tuff ceramic from western clutches was told itll hold 500-550 hp

Not happy at all done about 2000km and on the first launch it flared to 8000rpm all of 1st and 2nd gears had to back it off 2 times to make it grab in 2nd. In gears in dosnt flare.

I dont recomend to anyone this Shit clutch.Unless you feel like wasting $900 + the labour fees.

Edited by nismo 400 R N1

i live in NZ and shipping something the weight of a clutch probably wouldnt be worthwhile so i was just interested theoretically as various "experts" have such differing opinions.

I would ring Jim however the chance of me buying something off him is small and i dont want to waste his time.

There are second hand clutches galore around at the moment. If i was to buy a nismo twin plate how much approximately is the rebuild costs on something like that.

Cheers

Edited by SirRacer
Im thinking of gettin a clutch of jim.. however could someone please tell me how much labour would cost for installing this clutch?? cauz im in vic so i need to get it installed somewere else...

I've been quoted $250 labour to install a clutch into a GTR. Previously paid $300 for a GTSt (about 5 yrs ago). Cost of machining flywheel would be extra.

Both workshops in Melbourne.

  • 4 weeks later...

Ive had a Jim Berry "race clutch" in my 33 for the last 18 months and it has never slipped and was running 300rwkw. I know have closer to 400kw and even a 6500 launch and slicks still didnt slip. They are awesome.

My R34 GTT needs a new clutch... was going to go for a twin plate, but maybe Jim is the better option? I'm in NSW so can he build it all for me, then send it here and I get it installed by someone else? It's for an R34 GTT and I want it to be able to hold about 265rwkw, does anyone have a rough idea on how much it'd cost?

Im in Tassie and i got mine delivered with a standard flywheel for less than $1300 but that was a while ago. I did have a Nismo twin plate and that was hard to press in when this clutch from jim is nice and easy but grabs hard.

Ive had a Jim Berry "race clutch" in my 33 for the last 18 months and it has never slipped and was running 300rwkw. I know have closer to 400kw and even a 6500 launch and slicks still didnt slip. They are awesome.

how much was that?. i am awaiting a call from him tomorrow. mine made just over 700hp at engine and am wondering whether a single will do

cheers

Put me down as another happy customer of Jims, also got the full monty from him, have had it in the car 6 months now and haven't had any problems at all...

and as stated before alow at least an hour out of your day for the phonecall.. Jim loves a good chat

My Jim Berry clutch was so good it was as easy to drive in my 320kw gtr as my budget exedy was in my 185kw r33 gtst.

Just don't forget when ur getting a new clutch to spend the extra $500 and get a new flywheel with it :happy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...