Jump to content
SAU Community

Recommended Posts

cheapo lights are around $7.50 a bulb. Toothpaste is an abrasive so it makes sense that it would clean the plastic... I've heard it being used to polish other things too, but cant remember.

I polish my glasses with toothpaste once a month.

Sorry. I'll go now.

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 1 year later...

I had some overspray on my headlight and cleaned it off with thinners.

What a farken mess! looked like wrinkly skin.

I tried cutting polish, that just made it shiny but didnt get rid of wrinkles and realised I'd really farked up. Tried Auotsol that worked but it was gunna take ages to get rid of all the wrinkles so I stepped up a notch and tried Gumption, that worked better but still a long way to go, until I used a 3m pad with the gumption. That worked really well, still took a while but only 1/2hr,but I to continually clean the pad because it built up with bits of plastic pretty quick. I then cleaned with water and spayed silicon spray on it and it came up a beaut.

If you look at my avitar you can see how farked it was.

DONT DO THIS UNLESS YOUR PLASTIC IS REALLY FARKED

  • 1 month later...
  • 4 months later...

Question, In order to remove the headlights, do i have to take off the front bar? If i do, the front bar for the r33 gts-t series 1 is just 3 screws at the grille, and 2 on each side under the fender right?

  • 4 weeks later...

I dont think u need to remove your bumper to take off the headlights. The actual headlight asembly is easy to take off from the car.

But no-one has answered the question of how to take off the front plastic cover from the headlight assembly. Can it be properly re-sealed? I have cleaned my light 100's of times with that polish from Unique Auto Sports and it is just a heap of crap. It works and looks good for a day or two then bang, yellow again!

  • 2 months later...

Putting your headlights into an oven to pull them apart is going to be risky.. especially if you've never done it before. When I got my R33 series II my headlights were (and still are) frosty looking because of the crap on the inside you just can't clean.

I did manage to find a place in Blacktown called Plastifusion and all they do is headlights. Link --> Plastifusion

They will do the hole oven business thing with your headlights, polish them up (inside and out) and re-seal them again. Unfortunately for me though one of my headlights has some fine cracking. In that condition they won't pull it apart to polish it. I basically need mine replaced :D

Anyone know of a place where I can source some cheap series II headlights? Nissan want $1000+ for a pair :P

There's also a place in Keysborough, Victoria that does change overs (is it Mr. Headlight??) Do a search on headlight +replacement, I read the thread 18-24 months ago...

any link? i broke the screw that adjust the level of the headlights, now they are pointing too high. thx

Could it be these guys?

Melbourne Headlight Exchange Pty Ltd

Unit 2/ 130 Bridge Rd Keysborough VIC 3173

ph: (03) 9706 3922 Auto Parts Recyclers

I couldn't find any website link for them.

When you guys clean the headlights, are you doing it with the lights still in the car, or are you guys actually removing the headlights and then doing it? I just dont want to get toothpaste or the maguires stuff on the paint??

how you going mate?

I just got my 33 back from insurance damage of some moron reversing into it.

The second hand lights put in by "Gold Coast Panel Works" on the gold coast, looked like they were brand new. And I mean brand new when i picked it up. If you bought a new car they would stack up.

They are based on the Gold coast qld. Im not sure how they made these lights from the wreckers look like this.

They are in southport give them a buzz

I guess alot of ppl might have this problem if your line is year 94 and below.Mine's a 93 and the headlights getting a bit yellowish.Just wondering how to make it white and shiny(like big red) again.

thanks

If its just the outside(I thought it was on the inside because tried lots of different things and didnt change) MR Sheen no s**t! took it right off and thats without removing the lights

Edited by BOVed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...