Jump to content
SAU Community

Recommended Posts

Hey guyz i just wanna know where i can get my stock turbo high flowed and how much would it cost and the power difference ????

thank you!!!!

GCG do it, they charge around 2k to do a hiflow job, or 1k to rebuild a stuffed already hiflowed turbo.

i would personnaly spend the money another turbo, you can buy my rb25 highflow turbo if you want, recently rebuilt... got papers.

i want more power... :)

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1898413
Share on other sites

I'm getting mine highflowed on Monday :domokun:

This is from Sydneykid himself in another thread:

I can't speak about other high flows, but GCG use a brand new dual ball bearing core, new (larger diameter) shaft, new seals, new gaskets, new compressor, new turbine, machine the standard compressor and turbine covers to suite and them micro balance the whole rotating assembly. It's basically a new turbo, everything that is subject to wear is brand new. All the components are covered by Garrett new parts warranty.

It bolts back up exactly as it was when standard, everything fits, no mods, no extra parts, no missing bits, no days waiting for stuff to be made, just bolt it up up and drive away. That is simply not the case with an aftermarket turbo. You will most likely find yourself spending hundreds of dollars more buying and fabricating parts to get the off the shelf turbo to fit.

You can of course buy a turbo with a fitting kit for an RB25 (GTRS for example) but they cost ~$3,200 by the time they get here. That's a valid (total) cost comparison.

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1898579
Share on other sites

GCG do it, they charge around 2k to do a hiflow job, or 1k to rebuild a stuffed already hiflowed turbo.

i would personnaly spend the money another turbo, you can buy my rb25 highflow turbo if you want, recently rebuilt... got papers.

i want more power... ;)

how much more power would i get from that turbo compare to mine atm and would it bolt on and what price would u sell that at? thanx

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1901402
Share on other sites

have heard of the GCG's making 250rwkw range depends on what you ask them to do. They were also doing specials for SAU members $1800 something like that but that was a while ago.

Edited by race_snooze
Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1901716
Share on other sites

Yes, another vote for Slide's turbos... PM him and explain what you want, he'll tailor the hi-flow to your specific needs (maximizing power, but reducing the lag). Furthermore, you'll be talking to Slide, not some salesperson who doesn't have all the answers!

All his turbos come with 1yr warranty provided you install and use them correctly. A handmade turbo that's made to spec for your own vehicle + warranty under $1k, where can you go wrong!

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1902966
Share on other sites

You can go wrong without ball bearings.

SAU NSW club members get 10% off at GCG.

GCG highflow = $1950

10% = $195

cost now = $1755

I'm making 255rwkw at 0.9 bar with cams on an auto.

Oh and whoever can get me an HKS 2835ProS for $1750 - I'll take 10.

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1903138
Share on other sites

if you're after a cheap upgrade, go with the t3 off a 300zx (the single turbo version), but these turbos are a little old so make sure its in tip top condition.

hi-flowing one of those would be more beneficial i think.

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1904250
Share on other sites

i cheked out this site

www.horsepowerinabox.com.au

for $3900 u can get a bolt on gt 34/40 cabable of 280rwkw or more, thats the turbo im puttin om my r33, have a look they seem to be pretty cheap turbos on here.

also another vote for slide he is cheap and very helpful

Link to comment
https://www.sau.com.au/forums/topic/103294-high-flow-turbo/#findComment-1905362
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...