Jump to content
SAU Community

Where To Find/buy 2nd Hand Semi Slicks / Slicks?


AzzurrA
 Share

Recommended Posts

Well, being the tightarse that i am and not being able to afford a brand new set of semi slicks/slicks, i'm looking around for a 2nd hand set to run at sprint days etc this year.

I was wondering if anyone knew of any people/places to speak to (Preferably in Brisbane, though its not THAT critical) that may have some that they're willing to part with for reasonable prices, as i don't have a huge budget to play with?

Sizes i'm looking for are around the 205/55/16 sort of area (for a 6.5" wide rim, so slightly smaller or larger is okay as well)

Thanks in Advance

Jason

Link to comment
Share on other sites

unfortunately it may be a hard ask finding second hand 16s. most of the serious guys these days are on 18s+, and it's the serious guys who turf out half worn tyres. the guys who are on 16s are usually at the tight arse end of the scale, and as such use 'em till they pop.

Link to comment
Share on other sites

unfortunately it may be a hard ask finding second hand 16s. most of the serious guys these days are on 18s+, and it's the serious guys who turf out half worn tyres. the guys who are on 16s are usually at the tight arse end of the scale, and as such use 'em till they pop.

:) Sounds like me (how you described the 16" crowd, lol)

Thanks for the help anyway Beer Baron

Link to comment
Share on other sites

the Saloon Cars (commodores and Falcons) use 225/50*16 Bridgeston RE55S (same as in that flatspot pic) as their control tyre. The front runners replace them regularly, and their 2nd handies should be very cheap (they pay $225ea brand new).

Edited by hrd-hr30
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I'm in the market for 370GT.  I live in Canberra and not much available so I'm looking interstate.  Can anyone recommend an inspection service with expert knowledge of Skylines? Sydney, Melbourne and Adelaide (Elizabeth area)
    • A million years later, searching for something else I posted, I was reminded of this thread. I eventually bought a new gauge. Put it in using the same probe (which has been installed the whole time stopping the exhaust gas from coming out the hole) and.... normal service has been resumed. The old gauge was definitely broken. /semi-pointless closure.
    • They're available from Nissan! I was able to buy a GTR (R33) one.. relatively* recently. Perhaps this stopped now but I bought mine ... relatively recently. I believe the 300ZX one has a different knee-point which is more rear biased, which I think the HFM one echos.
    • Hey Team, A bit to unload here. Hello from New Zealand I have a 2009 Nissan Skyline 370GT ( Type SP ) Auto 7 Speed, that I've had since 2022 and have loved the car since. Its painted in its factory QAB ( White Pearl ) with the Impul front lip and rare boot lid/spoiler with woodgrain interior. Mods since I've bought it and installed: Stillen Gen 3 Long Tube Intakes Motordyne Shockwave Catback Exhaust JDM Skyline Taillights Fake carbon spoiler and front grill ( Will be taking off.... its cringe ) VR30DETT Transmission from the Q50/Q60 to hold up to 550 Foot pounds of Torque ( 753 nm ) reliable  Currently I plan to turbo the car and have all the parts needed ( Photo Included ), I have my tuning day set on August 8th and choosing EcuTek as my tuning platform. Two of my work colleagues has their 370Z ( Manuel ) and 370GT coupe ( Type SP - Manuel ) also turbo'd and they have inspired me to get it done I have prepped quite a wee bit for this, as I had done the VR30 transmission swap over to this car so that I can achieve my HP goals without torque being an issue. I've taken quite a cautions route, as im always thinking about the safety as well as performance with my build, I'd rather do it properly and not cut corners etc etc. Any who, I've recently picked up the AutoStrada cruise control kit with all the included cables/wires/instructions. I've been hella researching around and can't find much on the integration that it has with the ECU and/or system. the only reason why im asking is, because I'm getting EcuTek and one of them RaceRom features allows the ability to switch maps via the cruise control function, which I am currently in the grey area if this would add-on via the Canbus will allow me to switch maps or have the option to use Cruise Control to begin with ( showing up on the instrument cluster to advise Cruise Control being set etc etc )  Because of my model being Type SP, Cruise Control on these models was never an option from factory unfortunately.  Anyone here that is able to shed some light on if the Cruise Control via AutoStrada gives OEM ability over the cruise control. Would love and appreciate any response and/or assistance with this, also happy to answer any question about my build and ill try pitch in where I can. Warm Regards,  
    • I thought the only (new) BM57 that was readily available was the one that was a BM57 but with the wrong bias. HFM or someone's?
×
×
  • Create New...