Jump to content
SAU Community

Recommended Posts

i've heard the r32 front suspension is pretty average for double wishbone

:lol: :lol: :lol:

Yep, it's so bad that the R32GTR ruled the Group A circuit racing worldwide so much so that they changed the rules.

:P cheers :D

Not as a 4wd Group A car it didnt...did it?

Perhaps the wishbones arent the greatest ever deisgn i dont know...but any road car is goign to have compromised arm lengths, pick up points etc etc...surely they are still better then McPherson struts (Mind you , plenty of capabel cars are using struts)

i would say they had a very specific reason for doing it realted to the cars purpose. saying that it's better than 32 GTR gear is a bit hard to do without specifying "better at what.....?"

and yes, fatz is on drugs. why bring up his personal life here?

lick my bum lol

I had enough trouble getting it up in the first place.

seems in drift skylines run into understeering problems fairly frequently

enough to ruin tandem runs and have the judges give the other guy the win

I'd say this "s13" setup is trying to fix the problem aswell as other things Im not smart enough to work out.

s13 understeering Ive seen in drift vids is like 1 for every 5 skylines(and not that many skylines drift in the vids Ive seen)

hopefully this mod will help Tezuka(?) win a few rounds in D1

looks like he's already doing ok in the street class

lick my bum lol

I had enough trouble getting it up in the first place.

seems in drift skylines run into understeering problems fairly frequently

enough to ruin tandem runs and have the judges give the other guy the win

I'd say this "s13" setup is trying to fix the problem aswell as other things Im not smart enough to work out.

s13 understeering Ive seen in drift vids is like 1 for every 5 skylines(and not that many skylines drift in the vids Ive seen)

hopefully this mod will help Tezuka(?) win a few rounds in D1

looks like he's already doing ok in the street class

Skylines understeer due to the great lump of cast iron Rb up the front. Just like your cefiro :)

The blitz 4 door r34 seems to be doing pretty well with its double wishbone :D

Refer above to what Sk said if there is any confusion :)

"Skylines understeer due to the great lump of cast iron Rb up the front. Just like your cefiro

The blitz 4 door r34 seems to be doing pretty well with its double wishbone

Refer above to what Sk said if there is any confusion "

hmmm dont have a ceffy as sig says I have 32 4 door cef is the bosses car

blitz 34 seems to have shallow slide entry angle's to offset understeering.... trust me Ive watched a lot of option vids

Im not confused justs looks like double wish is not really suit to slides I think sk was refer to it just being a good setup not that it is great for slides

see number of skylines not in D1 or BM or any other drift series

blitz 34 seems to have shallow slide entry angle's to offset understeering.... trust me Ive watched a lot of option vids

Im not confused justs looks like double wish is not really suit to slides I think sk was refer to it just being a good setup not that it is great for slides

see number of skylines not in D1 or BM or any other drift series

There is a lot of experience in Japanese drift circles with macpherson strut front suspension cars, courtesy of the huge number of AE86's and S13/14/15's over the years. Understandably the drift teams feel more comfortable tuning a strut front suspension.

The reality is I can duplicate the dynamic camber change angles of an S13/14/15 whilst still retaining the R232/33/34 double wishbone suspension. I can also duplicate the roll centres and bump steer characteristics. Consequently the handling ("slide" if you prefer) would be the same, given equal other dynamics, mostly C of G and weight. But this is not simple to do, it takes some time to engineer and fabricate the necessary components.

My guess is they took the easy way out, used mostly off the shelf S13/14/15 parts, maybe just to test the theory. If it works, they may well revert back to double wishbone with duplicate dynamic change angles engineered in.

:( cheers :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...