Jump to content
SAU Community

Recommended Posts

i didnt think they were legal but reading the new motor magazine states that they are, definatley gonna find out for sure since i have them and wanna know 100%... mine a so secure feels so safe, i guess if they rattle then they would be defected for but secure ones i cant see whats wrong

i cant see why the flush mounted ones would be additional hazard to pedestrians... maybe the ones with the wire over the front or the ones that stick up... maybe try checking in your state... like everything else the laws owuld vary from state to state... just ring you local rta they will tell you...

I was in that position with a Bluebird that had a much modified rad support panel (foreigh R32 rad and hooge IC) . The answer was to fit a plunger (or as suggested to me dog cock !) style catch from a Datsun 1600 . It works well but the fabrication to fit it to the bonnet is involved and may damage its paintwork .

Cheers A .

They are Legal in Canada :P

and for the ones that rattle.... they were probably cheep ones... get them from a good Canadian or Japanese manufacturer :P

Edited by James Mramor

I thought they were illegal for pedestrian safety too.

Anywya, for pins that rattle they aren't tight enough. Either crank the pins down or add to the support between the bonnet and the chasis

  • 7 months later...

I have the larger ones on mine, with a latch, illegal in the ACT, wouldn't mind swapping them for the smaller ones. or putting blanks on the bonnet, as it looks bad atm with holes in the bonnet :O, anyone know if thats legal?

Can't comment on the legality of "bonnet pins" however i would see a car manufactures badge that protrudes the bonnet to be more of a pedestrian risk then a bonnet pin, but this is common sence therefore, it's probably the case that the pins are illegal in NSW. If they are, i'd just go flush mounted ones like someone already sujested.

I think it depends on the type of bonnet pin some cars come with them standard one that springs to mind are the old gt falcons which had flush fitting bonnet pins no protrusion above bonnet line so id say pins that protude above the bonnet line would become a problem for pedestrians i.e cause more damage to them .So if fitting bonnet pins try for something flush mounting

Cheers Peter

  • 2 weeks later...

bonnets are meant to crumple when you hit a pedestrian or crash, this makes it safer for you and the pedestrian. if the bonnet doesnt crumple it can go straight through your windscreen and take your head off. bonnet pins would probably be illegal because they'd prevent the bonnet crumpling properly.

This was argument a cop had with me regarding lifting the back of the bonnet up two inches for enhanced cooling away from the rear internal clips, but I cant see how pins would be a problem as they would retain the bonnet to the frame better.

The pedestrian damage issue would be the main reason, if in fact it is illegal.

Then again if it's a :-

Skyline = Illegal

Falcodore = Illegal

EuroWeapon =Legal :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...