Jump to content
SAU Community

Recommended Posts

  • Replies 205
  • Created
  • Last Reply

Top Posters In This Topic

Well I'm back home and pretty tired after an early morning and long day.

I had a great time. My tyres are very worn though. :lol:

Thanks to the organisers for putting it together. Great day!

Good day, im glad i did the midnight run up to drop off the Lada ;)

Watching other ppl have fun comes close to having the fun yourself. The guy in the Forrester is a GUN. Ferni's thing has some real stomp now, Big Boy is in love with semis, Geoff made a beautiful choice in rubber for the day...and im sunburnt and after an all nighter Friday, i just got 13hrs sleep :D

...and sorry Greg, ill post up a pic in a minute, it seems i may have misled you with the posting pics thing :)

as usual was a great day, well organised considering the trying conditions... big thankyou to all those who helped put it on! also thanks on behalf of my other half Kalli who was helping with the timing on the skid pan... she had a fun time being so close to the action... we put on heaps of sunscreen but still got burnt... happens every freaken time!

hey Russell I think we may need to organise a group buy on tires lol!

I got these, but that was it.

Again, my compliments to all involved in organising and running. I had a great day and look forward to seeing if I was competetive.

BTW to all considering Semi's...get a second set of wheels for them and do your driving on normal street rubber. The drive home in the rain was terrifying as they hunted every high spot and kept planing on deeper puddles (RE55S TT compound). The noise is like being in a rock crusher as well and massive vibrations through the car from the grooves. Good on the track and pan though.

Mav_DECA.wmv

post-6392-1140912955.jpg

Another great day at DECA ............. Well done to organizers. Weather sucked a$$, but it did make it more entertaining. Back track was interesting going backwards, skidpan was fun, but not having a handbrake sucked. I will have to put in a hydraulic handbrake for the next one.

P.S. Thanks to all people who let me go for spin with them :)

Edited by RPMZ

Thanks for coming along guys.

Was a hoot as always, i think the officials doing instruction laps worked well for those not-so-sure about where they were going :D

Hopefully everyone enjoyed themselves.

Apologies for the BBQ supply running out at one stage... ill have that sorted for next time.

And surprisingly after drinking the sheer amount i did last night, right now i feel 100% tip top ;)

Dunno if Snowy is gonna be in as good of a condition as me though... he cant handle the booze these days :lol:

:)

Just got home from Shep and I'm feeling very seedy and tired.

Thanks for a great weekend everyone.

Well done to the organisers and all the volunteers for helping out.

The weather was sooo unpredictable but at least that storm came in at the end of the day and not earlier.

Taco Bills was great, usual shinnanigans. Its all about the hats.

The award for the strongest drinking team during dinner would have to go to Snowy and James for having two 1.4 litre mageritas EACH. Thats a total of 2.8 litres of alcoholic drinks each before we even hit the nightclubs!

Outstanding Performance...

On that note I'm off to bed for an afternoon nap. My head hurts.

Post pics someone!!

The award for the strongest drinking team during dinner would have to go to Snowy and James for having two 1.4 litre mageritas EACH. Thats a total of 2.8 litres of alcoholic drinks each before we even hit the nightclubs!

Outstanding Performance...

You know the only reason they got another one dont ya? ;)

Cause i was 1/2 way through my 2nd and they couldnt be out done by a bloke thats a good 15kg's lighter than each of em :)

Geez - it's always about you isn't it ash? ;)

We both know you drink like a little girl ;)

matt

You know the only reason they got another one dont ya? :D

Cause i was 1/2 way through my 2nd and they couldnt be out done by a bloke thats a good 15kg's lighter than each of em :)

We were given 2 hats? Surly thats something... better than one hat :)

LOL - Nice call from the guy who goes home there funyboy.

Next time dont go home and we'll see. You got size on me aswell and i can still match ya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
×
×
  • Create New...