Jump to content
SAU Community

Recommended Posts

Ok, my RB20 has stuffed a big end bearing, so Im going to need to do something about it soonish. The problem is I have a pretty tight budget.

My options the way i see it are

A) Rebuild a lower K RB20 and swap it for mine.

B) Get a stock 4WD RB25DE, stick my R34 turbo on it and remap my R32 ecu to run it.

Im thinking I could probably rebuild the RB20 for around a 1k including buying an engine, but after reading 666DAN's posts I really like the RB25 idea.

Can anyone give me a ballpark figure on buying the RB25? (has to be the 4wd one remember).

What injectors do the NA RB25's have?

Would I be able to get it back up to my current 200rwkw?

Any help appreciated

Link to comment
https://www.sau.com.au/forums/topic/108081-r32-gts4-engine-options/
Share on other sites

Ok, my RB20 has stuffed a big end bearing, so Im going to need to do something about it soonish. The problem is I have a pretty tight budget.

My options the way i see it are

A) Rebuild a lower K RB20 and swap it for mine.

Any help appreciated

Depending on how long you are prepared to wait and how much you want to pay, I'll have a healthey GTS4 AWD RB20DET motor coming out of my car soonish. It'd save you money with being a bolt in, and not have to fark around making sure everything works.

na rb25 from an R32 has the same injectors as rb20det

about turboing it?

I don't know..

I'd go another rb20 or have a look at my HYBRID RB thread in this section where someone posted a link to building an RB24 and 22 and so forth.

however, if you really want an upgrade, you need the money.. then go rb30det or rb26dett

Its actually a T70 turbo - heres what he said:

I'll be finishing the Cefiro with the RB25DE + T70 later today so I'll scan that when we're done.

Last reading was 249 rwkw @ 17 psi

Completely STOCK RB25DE with a T70 600hp, 600x300x100 FMIC, GTR Injectors, Z32 AFM, Desno 600 hp Fuel Pump, Remapped R32 GTST ECU, and that's it.

Depending on how long you are prepared to wait and how much you want to pay, I'll have a healthey GTS4 AWD RB20DET motor coming out of my car soonish. It'd save you money with being a bolt in, and not have to fark around making sure everything works.

Yeah i have a problem with my RB20 as well and may need a new engine.

How much?

I've never had anyone be able to give me a straight answer on what is wrong with my car. I think its cursed :

Edited by MADGT4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You don’t need to use full throttle all the time to break these blocks, 500kw at the wheels in more then enough to break them even with an occasional squirt. Hell I’ve seen them break under 400kw
    • A work around is to install the R35 card style AFM/MAF on the cold side of the intercooler piping and the BOV on the hot side piping. Works well, also you can combat the revs dropping by adding a bit more ignition timing on the idle ignition timing table to slow the rate of RPM drop.
    • Understood. If you dont have a ridiculous limit,  Tune, T's and P's are in check, and arent bashing it all the time and doing the due deligence for maintenance(inc oil analysis) then its pretty safe. 100% agree, let your right food control it to some extent.
    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
×
×
  • Create New...