Jump to content
SAU Community

Recommended Posts

Hi guys

My alarm is farked so I'll be driving around without an alarm for next few weeks until I can put one in

I might be parking in some dodgey places and thought about removing a fuse in the mean time after I park the car.

Question is which fuse is the best to pull out and where is it? I prefer removing a blade fuse and not the type that is in its own box because its easier to carry around and keep spare blade fuses

Link to comment
https://www.sau.com.au/forums/topic/108343-removing-fuse-to-disable-car/
Share on other sites

Many fuses can be pulled out to disable car. Fuel pump, starter, ign etc. The one i used before i had an alarm installed was the ignition fuse from the fuse box in the engine bay.

A good idea when you decide which fuse to pull would be to replace the fuse you pull with a blown fuse. That way it is not obvious to the theif which fuse to replace.

My experience has generally been that they don't want the car, they only want what's in it.

Having an alarm didn't prevent them sitting inside and stealing the radio; so now I have installed one of those Jayco Screecher alarms (110dB @ 2kHz) - it certainly reminds them that they haven't been invited into the car.

Pulling a fuse is probably easier than disconnecting the AFM... and pulling the ignition or starter would give the same result as an immobiliser... so I figure most theives would assume that there is an immobiliser and just go to town ripping anything out of the car that they can.

Might want to wire up a flashing LED or something in the meanwhile. I feel much more comfortable knowing that my alarm has a flashing LED. Kinda deters theives from even bothering in the first place I guess.

What about one of those power inverters that give you 240v out of a 12v source? Rig that up to parts of the car that are metal but not grounded...

Might be better suited for electifying your wipers. No more parking tickets! ;o)

(jk people... don't do this)

I'll go with arh32, i have a burnt fuse I'll use to swap with my fuel pump fuse in the mean time, i think thats a great idea.
So good that now every bloody car thief who frequents these forums knows to carry around a spare fuse as the first remedy to pinch a car that won't start. (which is why I have never publicly announced my secret anti-theft weapon).
I feel much more comfortable knowing that my alarm has a flashing LED. Kinda deters theives from even bothering in the first place I guess.
You obviously didn't read my previous post - thieves could care less about flashing red LEDs.
Guest Xinhua
or hook up a switch to it?

im hooking up a kill switch on my car.

Thats what i did for my car mate.. theres a switch under my floorpanel.. very hidden.. can't start the car without pushing the switch.. you can put the key in and turn.. nothing will happen.. Works very well.. good luck

Thats what i did for my car mate.. theres a switch under my floorpanel.. very hidden.. can't start the car without pushing the switch.. you can put the key in and turn.. nothing will happen.. Works very well.. good luck

probably the best example ive seen of someone asking to get their car stolen.

saying youve got a kill switch - ok.

giving the exact location.... that shits just not smart dude.

I think it's good to flood the topic with information. The more people that give ideas, the more variety people can use, and any thief reading through will have to remember 20 different places for 50 different cars. He's not going to go through each and every one to find the "trick" to stealing it. On the other hand if we only heard about the blown fuse one, anyone without an alarm and without any better ideas would probably do it, and the thief would be able to casually check every car for blown fuses and probably get a couple easily.

It's probably best to use a combination of things. For example, pull a fuse as well as putting a kill switch in, or 2 kill switches in different areas. I've got 3 different things - club lock, alarm with starter kill, a separate 3 point immobiliser, and a kill switch. Sure you can always tow it but if the thief is determined nothing will stop him. The best defence I've found though is to not park it in dodgy areas.

Also a good idea for the kill switch is to not necessarily have it as one of those metal toggle switches. Something that doesn't seem like a switch to the touch, like a you press. A friend has a "toggle" button which you can push up or down for on/off. If you were feeling around without knowing about it you probably wouldn't even notice it, it would feel like one of those plastic screws you use for keeping the kick panel on.

a car i've driven before had a good idea. it was some kind of circuit linked to the starter. you had to complete the circuit to use the starter. you had to be touching the key with your right hand, and with your left reach down to a screw that holds on the left kick panel (side of center console) this would complete the circuit and allow you to start the car. quite a good one.

Well yes it can be towed. But opportunistic car thives dont have tow trucks at disposal.

As mentioned, if they really want your car they will get it.

A lot of my friends have kill switches and they are in some ingenius places, well hidden places and right in front of you places. Like using one of the factories blank switches and putting a switch there as the kill switch with "demister" for example. Multiple horn button steering wheels with one of the buttons used to complete the starter circuit. Another mate has a buggered electric aerial and you have to press the aerial up button to start.

But to reiterate what I said it can still go missing.

Mechanics are a good place where your guard is let down. You might of been there for 10 years and trust the guy with your life but his apprentice who started a week ago might need to move the car and ask "how do I start this thing". Then cut your key during his lunch break and....you get the idea.

Hey since you guys are tellling everyone your secrets about wiring and fuses now we have to do all of them at once so they cant guess which one it is! Or take the engine out with a crane and put it in our lunch box you morons!

Shut the f**k up and youse your brains!

Not everyone on these sites regardless if they own a skyline is trustwrthy!

I knew of a guy with a vl turbo with a rb25det and everyone of the performance parts he had on the car were ripped off other cars!

f**ks sake

LoL sorry. I didnt ask for any secrets

I actually pulled the fuel pump fuse out a few times in the past week and put a blown one in when going out, the peace of mind was more than worh it. I cant watch a movie knowing the car is not secured.

I got a very decent alarm installed on Sunday, I wont say what it is!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...