Jump to content
SAU Community

Recommended Posts

Alot like how only one of your air conditioning functions works :)

only because i accidently pulled it out trying to get heat on while i was driving on a bumpy rd in busselton hmmm

only because i accidently pulled it out trying to get heat on while i was driving on a bumpy rd in busselton hmmm

WGMG? Bunbury roads, they are shite!

WRGMG: Public transport, when people in front of you walk hell slow down the stairs and your train is about to leave.

also to a larger extent, the Australian Government a bunch of dickheaded thieves

taxi drivers who stop on busy roads when there is a perfectly good side street or driveway,

taxi drivers who are pulled over in a fkn stupid spot then when its clear to overtake they pull out into u.. then they do 15k's under the speed limit so u overtake them and they swerve at u on ur way past.

taxi drivers in general,

is it me or everyones washer jets seem to have problems?

mine just stopped working and i cant work out why :down:

WGMG are tossa's who pull into the gap you leave between yourself and the car in front..... and to the tossa in the 32, that gap was not for you dickhead!!

I really hate this, especially when youre going down the freeway and ESPECIALLY when its raining.

WGMG, stupid mums in 4WDs late picking up their kids and haaave to floor it to get 1 car infront when lanes merge! :blink:

merges are just overall shite here.

i saw someone get to a merge on leach hwy the other night, and they braked...there werent even any cars around them...(i was behind)

but yeah

crazy people in over sized cars that werent even built for the city :blink:

eff off.

Engineer's who come from another country, can't speak the language and have no experience in the job. Then when they find something that they think isnt right but is then give you a tune about it. Grrr! :D




  • Similar Content

  • Latest Posts

    • Need to see other side of PCB in that area...ie; I don't see any thru-hole mounting, just soldered vias (smd zeners in SOT23 have 3 legs but only 2 are used, as reflected by PCB tracks)
    • 4 to 5 is fine. It will be slow, but that's better than blowing turbos. I don't have a PS pump idle up solenoid on my car, because... I think when we put the Neo in we retained my R32 lines. But.... From inspecton of the R34 vacuum hose diagram, you can see that the solenoid needs to be connected to the turbo inlet as source of clean air) and the plenum (as source of vacuum - which is the place for the air to flow to to cause the idle to increase). So 3 to 1 is VERY WRONG. 3 should go to either the turbo inlet, or the plenum. Follow the other hose from the PS solenoid and if it goes to the plenum, then your 3 goes to 2 2 would also serve as a bleed port for a boost solenoid.
    • Pull them out and pull more apart. You can't do shit with them still bolted to the floor of the car.
    • Yes it is. ZD1 is on the other side of the board. Where ZD1 is marked is clearly opposite a 2 pin device. Our 3 pin device here is not a ZD.
    • Alright, a little update on this... I called Fulcrum, who used to be the distributor in Australia. No Bueno, they don't service them anymore.  Called shock works, who don't service them but offered to dyno the shocks for performance, and suggested DNA in Sydney might service them.  Called DNA, who also do not service them and basically said they try to steer customers away from tein for this exact reason these days- there is just no support for them anymore apparently.  Both SW and DNA said they are a not necessarily a bad product, but they just don't service the brand or know anyone who does service the brand anymore.  So... I could keep calling around but at this point I think I'll probably just spring for the shockworks product, unless anyone here knows anything.  Cheers 🍻 
×
×
  • Create New...