Jump to content
SAU Community

Cefiro In Indonesia!

cefiro69
 Share

Recommended Posts

cefiro69 Enthusiast

cefiro69

Posted
Posted

hi guys..

my cefiro is making 228rwhp which is about 170rwkw

is that normal for this kind of modification??

porting and polished head

oem rb25 turbo on 16psi of boost

fmic

oilcooler

dastek unichip piggyback

custom dumpipe

turbosmart megasonic bov

PE timing belt

HKS single clutch

here is the dyno result

IMGP0339.jpg

IMGP0340.jpg

Link to comment
https://www.sau.com.au/forums/topic/115999-cefiro-in-indonesia/
Share on other sites
cefiro69 Enthusiast

cefiro69

Posted
  • Author
Posted

yeah it's high octane fuel for small plane like cessna.. it's called avgas here.. or stands for aviation gasoline.. it's cheaper than VP..

it's a really hard thing to do a burn out like that.. i had to use my left heel and toe to play with the brake and gas pedals...

cefiro69 Enthusiast

cefiro69

Posted
  • Author
Posted

front bar? do you mean front bumper? it's custom made using fiber.. but i told the maker, i want a light front bumper.. cause i use this car for drag race.. trying to lighten up my car.. cause it's heavy.. i just got microtech LT12s.. still trying to find the right turbo and cam, to make an excellent power...

cefiro69 Enthusiast

cefiro69

Posted
  • Author
Posted

i think the main setback was the piggyback and the standard injectors...

but next week, the LT12S will be ready to be tuned.. i'm expecting more power.. and i'm still waiting for a friend of mine to sell his special ordered used cams and splitfire coil, from his RB26DETT...

and i'm still trying to find the right turbo that fits my budget.. was going to try to buy KKR's turbo, but still have doubt that it will last for long...

anyone here selling their GT2530 or GT2835??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...