Jump to content
SAU Community

How The Heck Do Screamer Pipes On Internal Gates Seal Off?

dcapitatedposum
 Share

Recommended Posts

dcapitatedposum Rookie

dcapitatedposum

Posted
Posted

I searched all over, and hav'nt gotten an answer that stops my mind from mulling over this yet.

On a car with an internal gate and a dump pipe with the open "screamer", how does the dump seal off from the screamer to keep it from being a continuous exhaust leak from the screamer it's self?

Someone is selling them on here for 32s and 33s, and I really want one, but I just cant see it sealing up.

I see that they have a piece of pipe extending into the exhaust housing, but is that enough to seal it up?

I would love some input from some of the fellas who have purchased, and are using one of these.

Also, this may be a dumb question, but if I dont mind the loudness of my straight 3" exhaust with straight thru muffler, or the sound of an open pop-off valve...will this thing be ear peircing, head ache inducing loud? Or will it be just another turbo sound to add to the list. Once again, opinions from those with ANY kind of screamer pipe, internal gate or external would be very helpful.

Thanks in advance for your help guys.

Baz Experienced

Baz

Posted
Posted

It works by having an extended seperater which comes off the flange to seal the exhaust housing of the turbo from the waste gate and exducer (exhaust wheel) of the turbo. Have a look at BATML (I think it is) split dump for R33/R32 in the business section and you will see how the seperator goes.

Screamer pipes on stock turbos while as not being as loud as ones with external wastegates are still f**king loud as. And considernig stock turbos are pretty small it will be on venting pretty much the whole time. Sounds cool but a bit risky in terms of getting pulled over and scaring little kids and old women.

Amaru Veteran

Amaru

Posted
Posted

It seals up to the outlet port of the internal wastegate. Try and picture an exhaust housing on the turbo like this (oO). The smaller o is the outlet of the internal wastegate, the bigger O is the nomral exhaust from the exhaust side of the turbo.

My personal opinion is they sound like crap on most internally gated turbos.

dcapitatedposum Rookie

dcapitatedposum

Posted
  • Author
Posted

So you guys are saying that the pipe that extends into the tubine housing and looks like it almost touches the blades(I know it dosnt, just using for refference), will seal off all of the main exhaust gas from the waste gate exhaust. Correct?

When I'm criusing along at less than my wastegated boost pressure, the "screamer" will be completely silent, correct?

Then, at Max boost, it will make a whistling sound mixed with an open down -pipe kinda sound. Correct?

When I release the throttle, it will also flutter a little before the BOV can catch up to it. Correct?

Sorry to be a pain, just learning somethin' new here.

Thanks for your replies so far.

Amaru Veteran

Amaru

Posted
Posted
When I release the throttle, it will also flutter a little before the BOV can catch up to it. Correct?

That is correct, you might have heard people saying they have a wastegate not a bov, do this mod and you can say the same too. The screamer pipe is what gives the VL's their "choof choof choof choof" noise.

Butters Experienced

Butters

Posted
Posted
How The Heck Do Screamer Pipes On Internal Gates Seal Off?

They dont !!

Ignoring the fact that they are usually china made POS things.

There is no gasket and the two surfaces are not face machined. There is no way it would seal 100 %.

You would always have a slight exhaust leak through the gate pipe(screamer) even when the internal gate is closed.

Most people just live with this or pretend its not real.

dcapitatedposum Rookie

dcapitatedposum

Posted
  • Author
Posted

Holey crap! That thing looks terrible. I can see how it would leak all the time.

The other ones I've been looking at on here with the little protruding pipe thingy seem like they would be much better than that thing. Ugh.

My final question before giving up on this is... Does the little exhaust leak sound like a tick, sorta like a leaky gasket, or is it a smooth enough sound that you do not notice so much???

You fellas have been very helpful, even if it means I'm probably not getting this thing now.

dcapitatedposum Rookie

dcapitatedposum

Posted
  • Author
Posted

Thanks guys. I'm just gonna get a reular divorced tube that goes back in kinda deal.

I know I probably wont ever hear the leak over all the other sounds my car makes, but it will never seem right to me. I guess I will wait till I have a real turbo and w/g to get the sounds that go with em. LOL.

I did not search to check, but do any of you guys use the american made cheapo SSautochrome dump pipes?

Some of their stuff is crap, but a dump pipe is what it is as long as it is 3" and dosnt crack twice a year on me.

If you happen to read this, and you have one, could you please chime in with your experiences.

BHDave Grand Master

BHDave

Posted
Posted

3 months is a long time. Mine lasted all of 3 weeks and it is a proper ex gate screamer too.

I just couldn't stand being the centre of attention whenever the car made boost......

someonestolecc Grand Master

someonestolecc

Posted
Posted
3 months is a long time. Mine lasted all of 3 weeks and it is a proper ex gate screamer too.

I just couldn't stand being the centre of attention whenever the car made boost......

Dave that's because you're sick.... but not FULLY sick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Kinkstaah
      Boost cut after swap(RB25DET NEO) R34

      By Kinkstaah · Posted

      Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • Duncan
      V37 Radiator removal

      By Duncan · Posted

      So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Duncan
      V37 Radiator removal

      By Duncan · Posted

      Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...