Jump to content
SAU Community

Recommended Posts

My target is 280rwkw from my R34 GTT. Turbo that will be used is GT3071R (90T) along with all other supporting mods including power fc and tomei cams. My question is if the bosch 040 will be sufficient enough to supply the fuel through the 480cc nismo injectors? If not will i have to upgrade to the external 044 ( dont want the nosie) or can i just get a pressure regulator?

Link to comment
https://www.sau.com.au/forums/topic/118346-power-goal-280rwkw-from-a-neo/
Share on other sites

thats a mean looking car you have there hyper!!! wot mods and turbo u runing?

Thanks Mate :thumbsup:

It's a GT3540R ext gate with the usual supporting mods.

Cams

Injectors

Fuel pressure reg

FMIC

fuel pump

Power fc

Cheers,

JB

im a great fan of search so dug up this thread

i want to build a fuel system capable of 350+kws at the wheels

the car will be used for burnouts and the occasional bit of drag racing

will i need to run a rb20det fuel pump feeding into a surge tank then something like an 044 from there or will the 040 in tank suffice. i would also hard wire the feeder pump. what size lines would i also need?

ideally id like to keep the boot room but dont want to run out of fuel.

My target is 280rwkw from my R34 GTT. Turbo that will be used is GT3071R (90T) along with all other supporting mods including power fc and tomei cams. My question is if the bosch 040 will be sufficient enough to supply the fuel through the 480cc nismo injectors? If not will i have to upgrade to the external 044 ( dont want the nosie) or can i just get a pressure regulator?

would a direct replacement nismo or tomei for a gtst r33 support 280rwkw or even a nismo or tomie for a gtr into a gtst?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...