Jump to content
SAU Community

Recommended Posts

In fact with a bit of squeezing with long nose pliers its possible to shut of all possible leaks from the other air chamber feeds. On the front side (does that make sense) you have two feeds to the blow off valves and the carbon canister. On the rear side there is a single vacuum line that feeds the brake booster.

In my case blocking all these off made no difference to the idle speed. So my problem is not an air bypass system issue. However, I only replaced the two throttle body gaskets but not the intake manifold gasket as that would have involved removing the associated water cooling components as well. That’s the only other place that I could imagine there may be an air bypass style leak occurring.

I have an aftermarket fuel regulator on the car which I no nothing about. In fact I’m not sure what impact that could have on idle speed. Does any one know?

Other than that I might flick the air flow meters for a spare set just to see if that makes a difference ( although the consult shows it shouldn’t :kiss:

so does this only affect R32 GTR? My R33 GTR also idles about 1100 RPM. It has only done this since getting it home and servicing it. It didn't originally do i when i first picked the car up - it sat at 900 then. It has a common issue with RB26s.

according to the underbonnet destructions, its supposed to idle at 650rpm. i've yet to see one that does. anyone? bueller? bueller?

mine runs at 1000rpm, but as i only idle at traffic lights, and everything else works - why worry? i aint gonna spend $1000 or more to fix a fast idle.

and yes, all gaskets are sweet, no air leaks (i replaced every external gasket once she landed on our shores) - although i'd be reluctant to pour water on a warm manifold -max 5 mins after startup for that trick.

The R32 GTR’s are supposed to idle at 950rpm. If the AAC is working correctly this will be the lowest the factory EPROM will allow it to idle. The work shop manual states that to set idle correctly, the AAC solenoid should be unplugged (or disabled via consult) and the idle speed should be set via the AAC idle adjustment screw to 900rpm. I guess this ensures the AAC solenoid regulates idle at the EPROM determined 950rpm. Of course if there is an issue such as a vacuum leak and the idle is artificially held above 950rpm then the ECU has no control (via the AAC) to regulate the idle. . If you have a consult program you can observe the AAC percentage vary to hold the idle at 950 rpm. Of course this only occurs at idle and only if the TPS idle switch point activates and provides the idle flag to the ECU. Again the consult will show the idle flag activate, followed by the AAC valve working to hold 950 rpm.

Edited by ADM

Hi cowie165

I use NissanDataScan v1.5 which I purchased for $30, not sure about the free/demoware options. Although for only $30 you might aswell purchase the real thing.

http://home.curl.aunz.net/tpkolo/DataScan.htm

http://www.plmsdevelopments.com/consult_if.shtml

  • 3 years later...

hey guys, i have a R34 GTT, it was sitting on 900 rpms, now after i changed the spark plugs to platinum, its idleing at 1100rpm, may sound stupid but maybe its the spark plugs or coil packs? im new to the car scene so please dont blast.

  • 2 months later...

I had a hunt at idle in my R32 GT-R. The highly technical solution was to adjust the screw on the front of the AAC valve, ie turn it clockwise to lower the idle speed, turn it anti clockwise to raise it. The hunt went away & it now idles at the setting the ECU tells it to. Which is about 1100rpm for a power FC.

Basically the valve does two things: Allows more air in for a cold idle. Controls the air (hence the idle speed when the engine is warm. It is buried under the inlet manifold next to cylinder 4 or thereabouts.

If the motor is hunting it is usually that it is getting too much air for the desired idle speed as programmed into the ECU.

Edited by djr81

Cant you just adjust the idling? Thats what I saw a mechanic did to mine (adjust it down to 950) but when I brought it to the tuner, he put it back up to 1100. Dont know why. I didnt have any problem with the car when I was at 950 too.

hmm....i alrady check my AAC is working ok, already closed the vacuums of the AAC and the air regulator, so its not there, i am thinking it could be the timing? because i remember before i removed my CAS, after installing i didn't use a timing light, and also my injector 6 is leaking, could be the cause?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...