Jump to content
SAU Community

Recommended Posts

Yeah its the maroon r33.

stock series 1 Mspec plus pod filter, hks fmic, 3in turbo back, gt-r cat, split pulse dump pipe. Also as a double din dvdplayer now. and ive purchased a new aftermarket ecu for it.

Ive put a deposit on new wheels and tyres with 18x8.5 fronts and 18x10 rear

offset dictates i will need to flare the rears, but I am looking for some gt-r rear guards to fit to it before a respray to white.

I've decided to throw the rb26 from the silvia into it some time before xmas, and the rb25det will end up in the silvia.

frankencars is where its at.

the s13 has widebody 180sx front end, rb26dett ,powerfc,r33 5speed, s15 steering rack, r33gt-r vspec turbos, r34 gt-r stainless dumps, 3in exhaust, hks front pipes, bride race seat, half cage, defilink oil temp oil press and water temp guages, 17x9.5in drift teks, s14 front hubs, r32 rear hubs and arms,r32 gt-r vspec mech lsd, gt-r axles,gt-r brakes, jic rear coilovers, cusco front coilovers, s14 front control arms, driftshop front bushes,alloy subframe bushes, power fc boost control kit, HKS drag gt-r intercooler, underbody air guides. probably a few other bits and pieces i cant remember.

the subaru is currently in the shop being tidied up before sale.

in my back yard at present is the s13, an s15, an r32 gt-r, an r33, and an rb26dett r34 sedan.

all of which (other than the s13 and r33) are for sale. :)

cheers\Jason

Yeah its the maroon r33.

stock series 1 Mspec plus pod filter, hks fmic, 3in turbo back, gt-r cat, split pulse dump pipe. Also as a double din dvdplayer now. and ive purchased a new aftermarket ecu for it.

Ive put a deposit on new wheels and tyres with 18x8.5 fronts and 18x10 rear

offset dictates i will need to flare the rears, but I am looking for some gt-r rear guards to fit to it before a respray to white.

I've decided to throw the rb26 from the silvia into it some time before xmas, and the rb25det will end up in the silvia.

frankencars is where its at.

the s13 has widebody 180sx front end, rb26dett ,powerfc,r33 5speed, s15 steering rack, r33gt-r vspec turbos, r34 gt-r stainless dumps, 3in exhaust, hks front pipes, bride race seat, half cage, defilink oil temp oil press and water temp guages, 17x9.5in drift teks, s14 front hubs, r32 rear hubs and arms,r32 gt-r vspec mech lsd, gt-r axles,gt-r brakes, jic rear coilovers, cusco front coilovers, s14 front control arms, driftshop front bushes,alloy subframe bushes, power fc boost control kit, HKS drag gt-r intercooler, underbody air guides. probably a few other bits and pieces i cant remember.

the subaru is currently in the shop being tidied up before sale.

in my back yard at present is the s13, an s15, an r32 gt-r, an r33, and an rb26dett r34 sedan.

all of which (other than the s13 and r33) are for sale. :P

cheers\Jason

Bloody hell the S13 sounds like a weapon. 33 should be fun with that driveline :D

Club Members!!! Vote now for your 2010 Executive Committee!!!!

http://www.sauqld.com/ipb/index.php?showto...mp;#entry130708 (Post number 28 has the link)

AGM is tonight!!!

Vote online or come to the Broadway Hotel, Woolloongabba, tonight at 7.30pm. $10 steaks or great gourmet burgers.

I'm not one to boast

But I cook a mean roast

And I'm not a bad host

But this line doesn't rhyme with any of the ones before it

I dont live on the coast

Im sure my skyline doesnt cost the most

Let us all give a toast

To the host with the most

:)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...