Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

It Aint Pretty But she f**king hammers... RB25 in my 32

R32Pictures014.jpg

Oh and I decided to dummy fit the rear wheels... overfenders leave japland in 2 weeks, not long to go now and itll be 100% finished.

R32Pictures007.jpg

Dummied up the flare minus the overfenders obviously

R32Pictures010.jpg

All ghetto'd up with tape just to give a general idea of what she might look like when done, overfenders and finishing should make a big difference but you get the idea :blink:

R32Pictures001-1.jpg

By the end of the year the goal is to be putting down 600hp at the treads and to have all the cosmetic work finished.

Shit Camera. Ghey Sun. Clean 32.

Yeah very nice 32 man, luv those rims but what is with your camera? my fone takes photos much better than that... i'd be taking it back to the shop asap. heres one of mine (in progress) i took on the fone, getting rims soon then lower it and that will be it for a while before i go broke...

post-26935-1159871928.jpg

Here's a few photos i took today with a shitty point and shoot camera.

The front bar is off at the moment because of a little driveway accident. (driveway won)

Ive added a few pics of the damage to the front bar, if anyone has done this sort of repair before please pm me as I have never worked with fibreglass before.

post-24087-1160015534.jpg

post-24087-1160015715.jpg

post-24087-1160015894.jpg

post-24087-1160016024.jpg

post-24087-1160016151.jpg

post-24087-1160016295.jpg

post-24087-1160016539.jpg

post-24087-1160016687.jpg

post-24087-1160016809.jpg

post-24087-1160017562.jpg

Edited by FOG35

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...