Jump to content
SAU Community

Recommended Posts

hooray car is lowered!

I think its down to 340mm

Worried about the front as i have a feeling they might hit the lip if i turn wheel and hit a bump.. ^^,

Now i need to fit on the typeM skits/rear pods + spoiler and it will be all good :P

before:

gtwingzt4.jpg

and after!!!

lowerdsw9.jpg

dscn4245mediumiw9.jpg

dscn4236mediumcb3.jpg

rolling i can deal with, but not really keen on flarring..

Can you post a pic of a closer look at the flarring?

Also how low is your car from centre to wheel arch?

I think my shocks will drop the height to 340mm and hope i wont need to flare..

Thanks

oi i rekon those URAS's were perfect offset and size for the rear, looks real tough, u can either play around with the rear camber to slip them under or get the guards rolled, although i have to say, i didnt have any issues with mine before i rolled my gaurds, im running around -1 degree of camber. u definitely wont need flaring.

this is mine when i had those wheels before Rekin (17x8/9 +30):

car7hy3.jpg

now with some modenas which are soon to be sold aswell (17x8.5/9.5 +45/+38, fronts with 25mm spacers):

car67jh2.jpg

next on my list will be something around the 17x9 +20 mark which will sit out another 10mm at the rear from both of those rear wheels and a few mm further than where those fronts are sitting in the 2nd pic.

340mm is best height for r32 in terms of handling. Refer to sydneykid's posts etc for detailed information :whistling:
yep spot on, mine in those pics is the recommended height, using SK's GB kit.

yep I got SK's whiteline set up too

oi i rekon those URAS's were perfect offset and size for the rear, looks real tough, u can either play around with the rear camber to slip them under or get the guards rolled, although i have to say, i didnt have any issues with mine before i rolled my gaurds, im running around -1 degree of camber. u definitely wont need flaring.

Just took car for drive, mine are scrubbing bad at front.

Any dips in the road and then you hear a creeking noise coming from the fronts.

Not sure if its scrubbing or perhaps the springs/shocks? as it seems to only come from the front right?

Guess its rolling lip on the weekend ~_~

Bummer dude, take the front wheels off and see if there is any damage on the tyres or body both inner and outer, i know that on a certian amount of lock my wheels touch the side skirts, on full they just tap the inner metals and over crazy massive bumps they might just tap the plastic under the guard... but ive got crazy stiff coilovers :(

Hey Rekin, I think your problem could be something to do with your shocks mate. Did you purchase second hand shocks and springs or new?

2nd hand kyb shocks with 2nd hand hks springs.

Perhaps i should get a suspension check done at Pedders?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
×
×
  • Create New...