Jump to content
SAU Community

Recommended Posts

Hey guys,

Just wondering, when your intercooler pipe comes off while giving it a bit....can it cause much damage to engine/turbo/anything??

mine came off this evening, and I have never experienced it, and as I am kind of new to turbo performance, I guess you could say Im a bit nervous incase there could be damage.

Morgs who was there, says these things happen! and are normally all good, just a time hassle to get it back on.

My car has only cat back, pod and a turbotech boost controller running 9psi - could this boost controller have caused the blow out? Say a spike somewhere?

Ive taken it off and put the stock part back on just for now.

Cheers guys,

Chris

Link to comment
https://www.sau.com.au/forums/topic/120872-intercooler-pipes-blow-off/
Share on other sites

Sounds like you either don't have a good enough rolled edge/retainer on the metal pipe or your clamps were either not tight enough or not up to the job.

When the exhaust is hot you could end up with a lot of flame out the exhaust like I did, melting the rear bumper, but you have to drive a little way for that anyway. Otherwise you could just clog up your plugs with carbon but no real damage will occur if you stop pretty soon after blowing the hose.

GTRgeoff - thanks for the reply mate!

Basically I pulled into the first side street as the engine shut down, no air getting in, stalled basically.

So fingers crossed its all good!

Cheers mate,

Chris

meh don't worry it happens all the time, will probably stall pretty quickly because afm is seeing heaps of air but very little gets to the engine.. the biggest pain is getting to the lower ones under the front bar.

Some fixes:

Bigger lip on the end of the cooler pipes

New cooler hoses, preferably silicon which don't baloon out under boost

Proper truck style clamps instead of those crappy screw type ones that Nissan gave us.

Yeh ive had the same thing happen about 4 or 5 times :D still have leaking problems to. Nissan clamps suck. None of the hoses justjap gave have come off but the nissan ones will need tightening using a spanner not a screwdriver. Also i noticed that my silicon hoses went softer pretty quick so after a week or 2 u might wana retighten. About 5 of mine were loose after the first week but now they seem ok.

well,

bit of a pickle again....

this evening, noticed he car was spooling louder and earlier

(I took the turbotech b/c off, so stock boost now) came onto main road, 1st gear, changed at 2.5k, into 2nd, went to bout 3-4k and the motor shut down again, spooled really loud this time.

Something must be up with one of the rubber joints yeah?

I cant see any splits, could be underneath where I cant see?

A friend thought maybe theres an electrical fault, i.e. a sensor is stuffed?

any ideas guys?

I can drive the car, but have to keep it off boost, which is likechanging at 1k revs!!

Not good

:blush:

hhhm.... thats odd, when i fitted my cooler yesertday i noticed that there is throttle lag when you drive normally but when you punch it you dont notice anything.

my car screams now from turbo spool and induction noise but i dont think its a bad thing.

although my car does now flutter heaps, sounds like wastegate flutter to me.

hmm...apparently everything seems fine.

My mechanic tookitfor a drive and said nothing went wrong, boosted well, couldnt get it to happen!

he even sprayed some carby cleaner over the pipes, gave the car a rev, and the carby cleaner didnt get sucked in, hence no leaks anywhere...but its still got a louder, higher pitched whistle than before.

really weird.

I wouldn't worry, i helped install a front mount on my mates supra and was boost at liek 18psi when one of the hoses blew off. The car stalled and the lights even went out :( but all was good jsut some P's and Q's on the side of teh raod at night trying to get the F#&$^er back on!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...