Jump to content
SAU Community

Recommended Posts

yes finally got the car

but damn the guy didn't put a 400R bar on for me, jus a normal gtr bar, guess he forgot but oh well.

66384939BwICXh_ph.jpg

66385020ZqFsBd_ph.jpg

66385074CyUYII_ph.jpg

66385139MHQqoB_ph.jpg

enjoy

but some really bad stuff happened. :D the shock is still sinking in

went into this carpark at glenny station and connected to it is another car park. looking straight on it looked flat, BUT it was infact slanted like a hill and i didn't see it. End result cracked front bar already. Pretty bad, i'm quite depressed about it being first day and all. The front is too low, it scrapes too much, even in driveways, its about 12.5cms off the ground. sigh is there anyway i can get this without changing the springs.

i can handle the damage and live with it, but i just dunno how to explain it to my mum. If you look in the pics you can see the two cracks in the middle, even the right indicator fell off.

how much would it cost to repair something like this.?

thanks:o

Link to comment
https://www.sau.com.au/forums/topic/12137-finally-got-the-carpics/
Share on other sites

heheh, welcome to the world of aftermarket frontbar meet driveway humps tragedy!

12.5cms not too bad, you just need to drive more carefully and not to trust any driveway/carpark entrances.

if your car's been lowered, best bet is to change spring and raise it back to factory height. I don't see any other way, except you have an aftermarket height adjustible coilover suspensions.

u wanted a 400R bar, and got a GTR and all u can say is, "oh well" ?????

dude, u wanted a 400R, i'm assuming u paid for it, u should bloody well get it.

oh.... nice car, those p plate stickers look mean.... what they add, bout 100rkw's??? :P

hey looks good chop!! now we can sort out a date for the meet

Can't wait inark, but still gotta settle some minor details first like insurance and then I'll be all set

Why are u scared of ur parents seeing the cracks?

Yes of course! they barely let me get the car you know!

u wanted a 400R bar, and got a GTR and all u can say is, "oh well" ?????

hehe actually I didn't pay for it, he said he would change it for me for free but i guess he didn't have any left, but damn my wheels are shocking, gotta repaint them.

Hey Chopobo, were you at glenny tonight, i thought i saw a r33 like yours parked in front of the chinese restaurant at the bus stop???

yeap that was most likely me in front of that chinese restaurant near lucky cup. i left when this woman gave me a greasy look. very uncomfortable. im not going there again.

Nice car chop.. you can try weilding your crack then a respray..

eh? how do you weld plastic?

i dun think i can do it myself. prolly get someone to do it. how much would it cost?

is it cheaper jus changing the whole front bar?

Guest INASNT

chop first time i took my car home from the importer i couldnt even get it up my driveway no matter what angles i tried, and yes i ***ing cracked the front of my 400r bar on the first day 2. My car was so farking low the front bar used to touch on speed humps even if i went fully sideways on em, i had to leave my car at my gfriends house for the first 2 days i had it. I ended up going back to the importer and changing the springs, now it just touches a little on the way out of my driveway.

U live preety close to me hope to see u on princess highway so we can have a run :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...