Jump to content
SAU Community

Recommended Posts

yes finally got the car

but damn the guy didn't put a 400R bar on for me, jus a normal gtr bar, guess he forgot but oh well.

66384939BwICXh_ph.jpg

66385020ZqFsBd_ph.jpg

66385074CyUYII_ph.jpg

66385139MHQqoB_ph.jpg

enjoy

but some really bad stuff happened. :D the shock is still sinking in

went into this carpark at glenny station and connected to it is another car park. looking straight on it looked flat, BUT it was infact slanted like a hill and i didn't see it. End result cracked front bar already. Pretty bad, i'm quite depressed about it being first day and all. The front is too low, it scrapes too much, even in driveways, its about 12.5cms off the ground. sigh is there anyway i can get this without changing the springs.

i can handle the damage and live with it, but i just dunno how to explain it to my mum. If you look in the pics you can see the two cracks in the middle, even the right indicator fell off.

how much would it cost to repair something like this.?

thanks:o

Link to comment
https://www.sau.com.au/forums/topic/12137-finally-got-the-carpics/
Share on other sites

heheh, welcome to the world of aftermarket frontbar meet driveway humps tragedy!

12.5cms not too bad, you just need to drive more carefully and not to trust any driveway/carpark entrances.

if your car's been lowered, best bet is to change spring and raise it back to factory height. I don't see any other way, except you have an aftermarket height adjustible coilover suspensions.

u wanted a 400R bar, and got a GTR and all u can say is, "oh well" ?????

dude, u wanted a 400R, i'm assuming u paid for it, u should bloody well get it.

oh.... nice car, those p plate stickers look mean.... what they add, bout 100rkw's??? :P

hey looks good chop!! now we can sort out a date for the meet

Can't wait inark, but still gotta settle some minor details first like insurance and then I'll be all set

Why are u scared of ur parents seeing the cracks?

Yes of course! they barely let me get the car you know!

u wanted a 400R bar, and got a GTR and all u can say is, "oh well" ?????

hehe actually I didn't pay for it, he said he would change it for me for free but i guess he didn't have any left, but damn my wheels are shocking, gotta repaint them.

Hey Chopobo, were you at glenny tonight, i thought i saw a r33 like yours parked in front of the chinese restaurant at the bus stop???

yeap that was most likely me in front of that chinese restaurant near lucky cup. i left when this woman gave me a greasy look. very uncomfortable. im not going there again.

Nice car chop.. you can try weilding your crack then a respray..

eh? how do you weld plastic?

i dun think i can do it myself. prolly get someone to do it. how much would it cost?

is it cheaper jus changing the whole front bar?

Guest INASNT

chop first time i took my car home from the importer i couldnt even get it up my driveway no matter what angles i tried, and yes i ***ing cracked the front of my 400r bar on the first day 2. My car was so farking low the front bar used to touch on speed humps even if i went fully sideways on em, i had to leave my car at my gfriends house for the first 2 days i had it. I ended up going back to the importer and changing the springs, now it just touches a little on the way out of my driveway.

U live preety close to me hope to see u on princess highway so we can have a run :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...