Jump to content
SAU Community

Recommended Posts

OK peeps

I posted a thread here a while back (6 months or more ago) asking for input on an intermittent miss fire I am getting on my PFC equipped R32 GTR.

At that stage I had ....

new iridium spark plugs

replaced AFMs

new plug leads (yes GTRs do have leads)

new ignitor

new split fire coil packs

I was looking for some input on where else to look – but I got feedback from a few guys that this sort of thing was 'common' with PFCs (common may be over stating things - but I was not the only one seeing this problem)

Can anyone confirm that this is a 'know issue' with PFCs ?

Anyone found a way to fix it – can the PFC be software (firmware) upgraded smehow ?

The reason I ask is that my miss fire seems to be getting worse. If seems to happen more often now, and also when under load. So a small miss fire when cruising along at 80 klms is no big deal, but a miss fire at full noise is something that I would like to fix.

PFCs seem VERY common - and I had no hesitation in getting one when I did my engine rebuild about 18 months ago - but no one mentioned at that stage that they have these sorts of problems.

It's not a big deal - but I would like to get to the bottom of it

============= UPDATED ====================================

OK this is a list of the userids that have reported this 'missfire' problem on this and my other thread. If you see your ID in this list can you pls let me know what model (GTR?) you have and the PFC software version so we can do some analysis. If you want me to add you to the list - let me know.

Userid...............Model..........PFC Version

===========================

itbmils...............R32GTR.......8.04a

markjh27.............................8.0

Amaru

SLIPPERY

GTR-80Y

GTR1993..........R32GTR.........8.04a

Driver

Tonnyk

NIB

JSWR32.............R32GTR.......8.04a

GILLIES2001 R32 GTR

Edited by itbmils
  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

Havent driven my car since October last year but it was still doing the same thing then (cruising along, it would just briefly miss). We watched the PFC tracer and looked at the cells it was running across when it happened and nothing seemed out of the ordinary, and we couldnt come up with an explanation for it.

However, a couple of GTR's that have had PFC's fitted since have also started doing the same thing (and they have been tuned by a few different places).

I think its just a bug you live with. If its getting worse it may indicate a different problem starting to rear its head.

just thought id add my experience. ive previously used a power FC in a GTR and it did the same 'miss' when cruising at light loads, say, every couple of days. sort of felt like the CAS was cutting out. wasnt like a slight 'pop' miss either, more like a hard jolt

just thought id add my experience. ive previously used a power FC in a GTR and it did the same 'miss' when cruising at light loads, say, every couple of days. sort of felt like the CAS was cutting out. wasnt like a slight 'pop' miss either, more like a hard jolt

yep - that's it - so you can imagine how that feels when you are actually hard on the peddle

ive never heard of this as a common problem, but what do i know :D

anyway it would be useful if you give some datalogit logs as this would give ample information to debug it. again assuming a sensor is actually seeing what the problem is, it could be simple leak/coils/breakdown problems.

what are the consistent things you see/know of when the problem occurs?

day?

night?

cold?

hot?

have you tried temp IGN adjust? less timing

have you tried temp INJ adjust? more fuel

whats the highest knock you see when it happens?

do you put the same consistent fuel in it each time ?

YES, i have this same friggen problem, i have a r33 gtst with a rb26 in it.i had my power fc installed a month ago, and i will be doig like 100k's and out of nowhere it will jolt only for a second. It doesn't happen all the time and u can't pin point whats going wrong ort when it;s gonna happen! I would also like to know if anybody knows how to fix this! As i don't want to be at full noise and have it go boom!

I find it happens day or night, doesn't seem to matter what weather conditions are, however it only happens when the car is warm. Not that i flogh my car when it's cold but it doesn't happen streight away, only when the car has been driving for a little while. Also doesan't seem to matter what speed, only when it's conmsisten or somtimes taking off.

Edited by markjh27

For me it only ever happens when cruising on light throttle. Its not a tuning problem as it sits around the same part of the map, and we have been through it and its all ok (if it was bad mapping, it would constantly complain sitting around those cells).

I have been told by a number of reputable tuners across Australia its simply a "bug". Have seen it happen in many R32 GTR's tuned at many different places, with completely different running gear.

ive never heard of this as a common problem, but what do i know :D

well neither had I until I got a half dozen responces and PMs that last time I posted this question :D

I then assumed it was 'common' and something I needed to live with

anyway it would be useful if you give some datalogit logs as this would give ample information to debug it. again assuming a sensor is actually seeing what the problem is, it could be simple leak/coils/breakdown problems.

Agree - but I do not have datalogit !!!

what are the consistent things you see/know of when the problem occurs?

day?

night?

cold?

hot?

any time - mainly when hot - but can happen when cold

have you tried temp IGN adjust? less timing

yep - no diff

have you tried temp INJ adjust? more fuel

yep - no diff

whats the highest knock you see when it happens?

my know readings sit at about 30-50 - but I have a noisy engine

Do you put the same consistent fuel in it each time ?

yep - BP Ultimate every time - different servos - and I've tried octain booster

Edited by R31Nismoid
Well this sucks, u pay 1450 for a comp and it has a damn misfire, that is not on. i am gonna try and get throguh to apexi japan and see whatr i can do. i will let u all know how i go.

Cheers Mark

go you good thing

The point of this thread was to try and judge how 'common' this problem actually is

same prob.....32GTR happens maybe once a week. Very quick miss and just feels like a jolt. Knock readings show nothing out of the ordinary.

I have had it once on full load knock and other readings seemed fine tho.

Really seems like a random miss with nothing to do with load or temps or driving conditions.

Are you guys running O2 sensors On or Off

Have you tried the alternate, to whatever setting you have

mine does it too :thumbsup: - maybe once a day or less?

tryed using a spare set of afm's.. just incase but it still happens

just happens randomly - usualy just while cruising along at any speed

Edited by Driver

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...