Jump to content
SAU Community

Recommended Posts

Yeah my 32 GTR with PFC does this also ! It has version 8.04A. Seems same as others- could happen a few times a day, hot or cold, mostly light throttle. I was told was prob a AFM problem but when i run it with the stock nissan ECU the problem stops so that rules that out.

  • Replies 212
  • Created
  • Last Reply

Top Posters In This Topic

If this info help, my FC Djettro with map sensors does it too.

It does it once in a couple of hundred-thousand km at very light load, it is unpredictable and is certainly not reproducible. All monitoring parameters are all safe. Go figure! I guess the GTR god want to be driven fast all the time :D

have added this issue as a work in progress to the FAQ

also it should be noted PFC's with NEC Processor 78P3 CPU are NOT reflashable

78p3.jpg

only newer, ie: pre 2000ish are reflashable, they have a 78F4 processor and an onboard connector for reflashing

78f4.jpg

dont recall this ever happening to mine. 32 GTR, PFC, 8.04a.

interesting - so what other mods do you have ?

I'm still fishing for some commonality some where !!

Also interesting to hear that even the D-Jetro PFC has this problem

my bad. yeah the newer models are ok

im pretty sure my ecr33 pFC isnt reflashable

and it was fairly new, 2002ish

but still based on the old powerfc chipset

this is my ECR33 from aroud 2002ish

http://members.dodo.com.au/paul/docs/power...werfc-board.jpg

it has the nec 78p3 processor

my software is 8.04a and R32 GTR

I think I see a pattern forming here >_<

OK

1: how do I check if my PFC can be upgraded (remove and inspect ?)

2: what is the current (newest) version of the software (should I be down revving ?)

3: where in Sunny Brisvegas would I go to get it done

1. if you pop the cover off youll see the NEC 78P3 processor, it will be part of the model number, it will be the biggest chip on the board. take a pic for recon purposes and post up or send to us please >_<

if its the 78P3 it cant be reflashed, as its a burn once chip

2. newest version not sure, i guess anyone with a recent Rb26 PFC, purchased in the last few months is likely to have the latest code on it

3. i know geniunine apexi dealers can fix/warranty and possibly flash/upgrade your PFC to a newer version but i believe this is only on $1500 PFC's purchased from like MYC or an aus dealer

ask myc.com.au how much to get a new PFC code installed on it (if they'll let you that is). you may find it cheaper and easier to buy a new PFC from nengun. but that guarantee's nothing at all.

the key to this i guess would be to find someone who has an RB26 32/33 ECU that doesn't have this problem, then look at what version they have. then ask nicely if you can swap FC's with them for a week and see if the bug follow's the FC with the bad version. if so then you'll know what the good version FC to go for is. sell your known bad version on ebay and look for a specific version FC

Ill pull the lid off mine tommorow and report what chip it is. Mine was in the car when i bought it, but they buy payed 1500 for just the power fc from PVP imports in SA, so i assume it could be a legit "aussie delivered" one maby.

Well - I got mine from Nengun (paid $950 for it)

So I KNOW mine will not be covered in Aus

I'd be happy to pay for the upgrade if

  • I knew it fixed the problem
  • it was not too expensive
  • did not require a full retune (dyno)

Seems I chimed in late on this one, but I have had the same issue on 3 PFC's...

One was in a 33 GTST & I have had a standard PFC & DJetro in my 32 GTR & they all did it.

Having said that it is so infrequent that I'm really not bothered about it.

I've been through 3 (well 4 if you count the Mines modded) ECUs on my R.

First version was a "3.08" version that had the intermittent miss at cruise loads.

Second was a Wolf 4 (MAP sensors) that had NO miss.

Third is the D-Jetro PFC and the "cruise miss" returned. Now the strange thing is that I recently (before buggering off overseas again) installed an HKS "Twin Power" CDI unit and the miss is gone for good!

I covered a good 1,000 kms with it installed and it's definately not a "placebo effect"

My gut feeling is that the miss is ignition related.

Edited by Gav
I've been through 3 (well 4 if you count the Mines modded) ECUs on my R.

First version was a "3.08" version that had the intermittent miss at cruise loads.

Second was a Wolf 4 (MAP sensors) that had NO miss.

Third is the D-Jetro PFC and the "cruise miss" returned. Now the strange thing is that I recently (before buggering off overseas again) installed an HKS "Twin Power" CDI unit and the miss is gone for good!

I covered a good 1,000 kms with it installed and it's definately not a "placebo effect"

My gut feeling is that the miss is ignition related.

I agree - it just feels like that sort of miss

what's included in the CDI kit ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...