Jump to content
SAU Community

Recommended Posts

not white, they are silver. yeah they are made by BBS, a sort of mesh style. not sure if they are 17X8 or X9.

they are quite nice, but i wouldn't go out of my way to find a set.

hope this helps...

Grey one is the Vspec I

white is the Vspec II

slim jims right on the specs, but chances are they won't have the factory fitted rubber

i've got these info sheets for the nismo and n1 if anyone wants them.

post-27256-1150530405.jpg

post-27256-1150530733.jpg

post-27256-1150530826.jpg

post-27256-1150531042.jpg

Edited by Usual Suspect

Yeah 17x8+30 (close up pic attached). I gave up trying to find a spare set.

Mine even had orginal spec Potenza 245s on it when it arrived!

PM have a V-Spec II f/s at the moment, but a couple of things suggest it might not be a genuine example.

post-5400-1150861040.jpg

  • 3 years later...

I know this is an old thread, but I thought it would be appropriate to post my question here, are the r32 gtr v-spec rims the same as the Stagea Autech ones (e.g width)? Just with a different center cap? as I am currently looking at some with the Stagea center cap and if they were the same was just going to get the original center caps from Nissan. Thanks very much in advance.

hope this helps...

Grey one is the Vspec I

white is the Vspec II

slim jims right on the specs, but chances are they won't have the factory fitted rubber

i've got these info sheets for the nismo and n1 if anyone wants them.

can u post the Nismo Sheets up in here plz??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...