Jump to content
SAU Community

Recommended Posts

Any other places where you can get RE55s? Looking for something closer to Mentone.

ps.

A few mags (here and O/S) have done scientific test to see how much time do R-spec tyres offer. All of the tests has a pro driver, the same car and did the test on the same day by swapping the wheels/tyres on the car. They always come back witn improvement of about 1 - 1.5sec per 60sec. So about 2sec for ~1:30 lap.

Though, I'm sure that the driver has a lot more to do with the 'improvements' than the tyres when you go back with different tyres. Afterall, I know people who have gone to the track with R-spec tyres only to come back with regular tyres and get pretty close to matching their times (ie. within 1/2sec). This was the case at both Winton and Sandown.

From what I gether, Sandown is where R-spec tyres make the least difference in particular if you do not have power-down problems (ie. 4WD). On the other hand PI is where they make most difference and people that I'm aorund get ~3sec improvement there by putting on R-spec tyres.

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

David,

The R compounds will help you most on tracks where lateral grip is important (eg Phillip Island liek you say) like you say.

You will find most tyre shops can actually source R compounds. You have to get past two things:

1: Most people don't know what the hell you are talking about (Eg "there is no such thing as an R compound tyre" as stated by my local Bridgestone shop proprietor.)

2: Unless you know the people running the joint they will probably pineapple you for the price.

If you know someone who owns/works/runs a shop try there first.

Precisely, it's a mostly confidence issue in the adhesion of the tyres. Not that I'm a relaible source since I haven't been on the track in 18 months.

From what I recall they don't let anyone fit them on 350Z's though David so you can forget about it :dry:

From what I recall they don't let anyone fit them on 350Z's though David so you can forget about it

lol, if I did not have a set on my spare wheels, I'd almost believe you ;-) Though, after 2+ years my current set has had it so need a new set before I head out top the track again.

You will find most tyre shops can actually source R compounds.

I'll try some nearby. Thanks.

  • 1 year later...

LOL...Australian Dollar has gone up..but the price of Petrol and Steel have too.

And due to the China's economy wanting these for their needs.....we pay what Bridgestone

thinks we can afford........... :cheers:

The prices have most likely gone up everywhere due to price increases by Bridgestone.

I recommend people enquire about pricing from my new supplier:

Pro-tek Tyres & Wheels

1b Ferntree Gully Rd

Oakleigh

Manager: John Souvas

Ph: 03 9569 0834

www.protektyres.com.au

:cheers:

That's a matter of opinion Paul. Agreed they are not the ideal tyre for street driving, but of course they can be used. They wont last too long with street driving though, for the same money better of getting some top shelf Bridgestone street rubber.

well for what its worth I share Paul's opinion. These tyres are dangerous in the wet with low (but still legal) tread. They let go and don't come back easily - so don't use them unless you are sure you can catch the skid when it happens

My mate has run Re070's on his '07 STI. He has gone through a full set in less than a year (about 7 months i think). And they arent cheap to replace. Not designed for street use.

yeah of course its a matter of opinion. you can use them by all means, have fun but its not a good idea.

they are designed for track use where they need heat in them.

put them on the street cold and when the road is wet, forget about it.

I've actually never had bad experiences in the wet with worn semis yet, I've been told about it so when it does rain and i'm on worn semis i pay extra attention. Depending how you drive your car, I think you can drive on these on the street fine, they are noisy as hell, and wear fast, but grip levels are insane when you get heat into them.

Thats not exactly true Paul. In the wet I actually think they are better than standard street tyres - as long as there is a fair bit if tread left. And thats the hard part because with normal street driving you'll probably only get 5,000km's before they are shot.

But for exmple I remember last year at Calder (track - not drag) a WRX being 3s faster in the rain on RE55's than on his "good" street tyres. Same deal as when R comps are cold - they aren't as grippy as when they are hot but they are still more grippy than normal tyres.

As said - the biggest problem with R comps and street driving is value for money given the short life span.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...