Jump to content
SAU Community

Recommended Posts

Im looking into building a approx 400rwkw RB30 for tarmac events, track days, and street use.

I was wondering on the best (performance and value for money turbo, and wastegate size).

Alot of people recommend the GT35r, but they dont seem to make the numbers? and that is confirmed by my rough fugures on the compressor maps (i could be very wrong).

I would prefer to use garrett as i can get them reasonably cheap - oh and i dont want to run to much boost, over 20psi say as i only have access to 95octane gas.

Also, is a 38mm wastegate suitable or do i need to use a 45-48mm size bearing in mind the later is generally twice the price.

cheers

rob

do you know that 400rwkw is about 536hp, dont thing there is any turbo on the market that will produce that power on or under 20psi and still be streetable, especially on 95ron fuel. suggest you be a little more realistic with power figure, say 300kw. Can make this power with GT35/40 with 1.00 or 1.06 rear with other supporting mods safely on pump on mild boost. 38mm gate will be ample for this combination. If you go bigger like a Gt42 or TA45 you may need to step it up to a 48mm or 50mm gate. but these turbos are designed to be boosted hard. They really dont work efficiently on lower boost pressures and you are still stuck with the lag factor. Good luck with it.

Im looking into building a approx 400rwkw RB30 for tarmac events, track days, and street use.

I was wondering on the best (performance and value for money turbo, and wastegate size).

Alot of people recommend the GT35r, but they dont seem to make the numbers? and that is confirmed by my rough fugures on the compressor maps (i could be very wrong).

I would prefer to use garrett as i can get them reasonably cheap - oh and i dont want to run to much boost, over 20psi say as i only have access to 95octane gas.

Also, is a 38mm wastegate suitable or do i need to use a 45-48mm size bearing in mind the later is generally twice the price.

cheers

rob

Edited by BezerkR32

Why cant you get better fuel?

If I wanted response for track days etc I'd use low mounted 2530's or mabye N1's.

GT30? (one of the bigger ones) Dunno if it can do it on low boost but.

do you know that 400rwkw is about 536hp, dont thing there is any turbo on the market that will produce that power on or under 20psi and still be streetable, especially on 95ron fuel. suggest you be a little more realistic with power figure, say 300kw.

I agree.

Relating to the wategate sizing part of the question, there is a link in the sticky "Guide" :D

http://www.skylinesaustralia.com/forums/in...=43638&st=0

Hmmmmmm………

3 litre (not a 2.6)

400 rwkw (not 450 rwkw)

20 psi (ouch)

Track work (yep)

Response (tricky)

Hmmmmmm………

I reckon you would just about satisfy all of those with a T04Z

But you are going to need to very carefully select your compression ratio, head work, camshaft duration and lift. Then its down to tuning, tuning, tuning.

:D cheers :D

PS; tip, get some toluene and get that ron up, make the job a lot easier.

Thanks for the info guys, im limited to 95ron as im in NZ, and they dont seem to give a stuff about the quality of fuel the give us... are octane boosters worth using?

I realise 400rwkw is a bit optimistc, but its been done here many times before, see R.I.P.S skyline.

SK, i was planning on using a GTR head with standard cams and maybe adjustable gears, with a CR of 8.3 to 8.5... sound doable?

What A/R and trim T04Z should i look for???

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...