Jump to content
SAU Community

Recommended Posts

Guys,

I'm thinkin of changing my diff oil tomorrow.. and I need some advice..

How hard is this operation ?

Anything to look out for ?

Anything i can do wrong ?

I was thinkin.....

1. Jack the back of the car up real good, so i can get underneath it.

2. Remove the top bung in the diff (is there one?)

3. Remove the bottom bung and drain oil.

4. Stand for about 5mins to drain fully.

5. Replace bottom bung

6. Using my handy-dandy oil pump, pump it into the top bung

-- Until it's FULL right?

7. Replace top bung and go for a burn.

Any flaw in my plan ?

I'm also yet to replace my g/box oil, but with the strength of my monkey-like arms i can't get the freakin' thing undone!

-Kym.

Link to comment
https://www.sau.com.au/forums/topic/12577-changing-diff-oil/
Share on other sites

Yeh u forgot the part where the car comes crashing down on ure head!!!!

Make sure u chock the wheels and use bricks or something not just the jacks.

Its gonna be a bitch to get ure hands to the top bung without a full fledged hoist. good luck to ya

Link to comment
https://www.sau.com.au/forums/topic/12577-changing-diff-oil/#findComment-230117
Share on other sites

Okay, so i changed my diff oil successfully....

OMG, that is the STINKIEST crud ever created!

Picture this: hot day, sweaty underneath a car, pumping stinky-like-ass differential oil for a good 20mins... ugH!

Thought I was gonna yack.... funny, the oil that came out was as black as hell... and even stinkier than the new stuff... *shudder*

anyway, mission completed. thanks for your help guys....

Link to comment
https://www.sau.com.au/forums/topic/12577-changing-diff-oil/#findComment-233908
Share on other sites

Originally posted by GTS-t VSPEC

Did you check the plug for metal fillings?

Yep, sure did, and it was all clean.... not a scrap of metal in sight.

of course this was after i dropped it in the oil-catch pan, splashing oil over me, and dunking my hand in smelly crud to retrieve it... *sigh*

Link to comment
https://www.sau.com.au/forums/topic/12577-changing-diff-oil/#findComment-234628
Share on other sites

  • 5 weeks later...

I used Castrol LSX90 chris, after that it made my hands impervious to water penetration also.. but that's nother story...

not too sure on the quality of this brand yet, as it feels like my diff is throwing power left-right constantly and not working right...

you got whining huh ? break up with her, simple!

Link to comment
https://www.sau.com.au/forums/topic/12577-changing-diff-oil/#findComment-293175
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
×
×
  • Create New...