Jump to content
SAU Community

Recommended Posts

Originally posted by R33NT

Feel free to TRY and dig up a picture of a kitted R32 that looks anywhere near as mean as the 400R.

[/b]

hmm a stock GTR? :D

but yeah, it does all come down to personal preference.

when deciding i opted for the 32 due to its aggressive racing looks as compared to the much larger and rounded (whale) of a 33. awesome car though, a few good improvemnts over the 32 such as a larger engine, something that will be going into the 32 soon hopefully :D

Shaun

Originally posted by R33NT

Well the reason i fell in love with the R33 is because of dare i say it the NISMO 400R body kit available for it.

http://www.skylinesdownunder.com/skylinepi...pics/r33no1.jpg

definately nice!

Feel free to TRY and dig up a picture of a kitted R32 that looks anywhere near as mean as the 400R.

easy

http://www.do-luck.com/img/nissan/sky/bnr32_2/main.jpg

Note

400R front bumper $595

Nismo Style rear wing $595

400R Side Skirts $450

400R Rear bumper and spats $495

400R style Carbon bonnet $1095

ie around $3K and you have a R33 GTSt that looks like a 400R!!!!

no offence but doing that is fairly ricey :D

Either way I think u misunderstand. I didn't mean to bag the 33. As stated they're both nice cars and have more in similar looks wise than they are dissimilar. Enuff said on this topic as there seems to be a very negative vibe brewing for no reason.:D

Could of got a 33, however newer is not always better in both the GTSt and GTR. although it depends what your looking for,the 32 is a much more throw-able, sports orientated car. If you want more of a family car the r33 is the go, as it has it's taxi heritage.

Nissan said them self they were trying to build the r34 to have spirit and throwablity of the 32 and the space of the 33. So it all comes down to, of course, personal preference and prioritys

If you want tuff, get a 70s Landcruiser. You want racey buy an ex rally car complete with exhaust shop decals from head to toe.:D

I cant say i prefer R32s over R33s simply because i own an R32. I have seen some shocka R32s, and some shocka R33s. If looking at stockas, ie wheels, body, ride height i then have a slight preference for R32s.

Go enjoy a sunny weekend kicking tyres getting a feel for what you like, by way of styling and driving. If Melb is anything like Syd, caryards can be like Nazis when you want to test drive, one place wanted 5k deposit. But you will soon find a place that you will only be too happy to give your maney to.

Maybe some Vic guys should get together and give you a raz in their respective cars, if you were in Sydney id only be too happy to.

Well the R33 was designed in a period where Nissan also released, the S14 silvia. It seemed the mid nineties nissan wanted to add a bit of luxo to their sports cars, which is probably why the R33 and S14 both got larger and better optioned than their respective earlier series.

Where as the R34 and S15 seemed to gravitate back towards a more pure sports styling (something the R32 always seems to be credited with).

I wont offer an opinion on R32 vs R33 because obviously im biased.

Red17

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...