Jump to content
SAU Community

Recommended Posts

Hi people

I just brought a R33 GTS

and almost every time i tromp it in 1st i hit the limiter b4 i go to second gear. Also the other day it was raining and i took off hard it span 1st to the limiter just b4 i could change gears.

Im not holding it on the limiter its just hiting it like "pop,pop" and then i change, and i goin to do any damage to my engine or is that what its there for???

Do you guys ever hit the limiter or are you all changing at like 6g???

just need some reasurance i dont wannner blow anything up

thanks

Deano

Link to comment
https://www.sau.com.au/forums/topic/127417-rev-limiter-should-i-use-it/
Share on other sites

i hit mine in second a few times when i first got it, but u quickly get used to changing before redline.

i reckon it's because the rb's dont feel like they're struggling, even at high rpms, so it's easy to over rev.

keep an eye on ur tacho when ur gunning it.

i would hate to buy your car after you have given it as hard a time as you are... i have like to have fun in my car which i have owned for almost 2 years and i think i have only hit the rev limiter maybe 4 or 5 times in that time

Man, some DAYS I hit the limiter 4-5 times.....and thats in an AUTO

My RB's never missed a beat, give it good oil and genuine everything else.

I dont think its a matter of not wanting to buy his car, rather, someone really wanting to buy yours :O

touching the limiter occasionally shouldn't hurt the car. bouncing off it is bad, because your engine's cycling from 0% to 100% power rapidly.

most cars reach their power peak before redline, so you're wasting your time trying to get that last 300rpm out of the motor. my charade was different, torque curve completely flat to the 7500 limiter so I may have hit it a few times during its lifetime :)

I never try to get to the limiter on first - second i ahve hit a few times. These days though, i take it max maybe 5 (eg when im on the fwy ramp) - no point in hurting the car, unless you are a rich punk who can afford to kill off a few skylines :)

agreed... if you can't tell when you're getting close to redline, and you hit redline every time you take off in first, you're obviously too unco-ordinated to be driving a high performance car... no.. wait... make that driving fullstop...

do everyone a favour and either learn how to drive properly, or sell the car and start catching a bus, otherwise we are going to hear about another skyline written off on the news.

c'mon guys ease up a tad. he is just asking if it's bad for the car or not. personally i would suggest it's not a good idea. a non-turbo skyline has seen it's best power wise a long way before the limiter anyway so really not much point. you will get a feel for the revs etc as you get used to driving it so wont hit the limiter so much after a while.

Put it this way, if everytime u drive it in every gear ur hitting the limiter then eventually something will f()ck up. Once or twice here or there wont do nething. Trust me tho after a few weeks u'll be able to change in time. Practice makes perfect

You also shouldnt be driving then :) although an auto should change before it hits the rev limiter anyways shouldnt it ??? As others have said i had mine on a dyno and from memory peak power is like 6400rpm so why take it to the 7,000 rpm or 7,200 whatever it is...

A: my car is not for sale

B: if it was i would by my skyline if i was looking :D

Man, some DAYS I hit the limiter 4-5 times.....and thats in an AUTO

My RB's never missed a beat, give it good oil and genuine everything else.

I dont think its a matter of not wanting to buy his car, rather, someone really wanting to buy yours :(

BeeR Rev Limiter really good cuts ignition as oppossed to your factory rev limiter cutting fuel which can cause damage...they also sound cool and make some nice flames!

sure, as if skyline turbos arn't weak enough...

how does a fuel & ignition cur cause damage, where an ignition cut doesn't? Ignoring the damage to the turbo / exhaust that a misfire system inevitibley causes...

c'mon guys ease up a tad. he is just asking if it's bad for the car or not. personally i would suggest it's not a good idea. a non-turbo skyline has seen it's best power wise a long way before the limiter anyway so really not much point. you will get a feel for the revs etc as you get used to driving it so wont hit the limiter so much after a while.

Why rev it to redline? you go quicker if 1) you have traction and 2) (average)engine power - which probably drops off in the high rpm.

Driving like that will cause damage - if not to your car, then to some one elses.

As long as there is good oil (and the engine is warm), I don't see it causing any immediate engine damage - but it sure causes alot more wear % tear (and not just the engine). Buy some good tyres. better traction, AND you won't want to waste them.

sure, as if skyline turbos arn't weak enough...

how does a fuel & ignition cur cause damage, where an ignition cut doesn't? Ignoring the damage to the turbo / exhaust that a misfire system inevitibley causes...

Why rev it to redline? you go quicker if 1) you have traction and 2) (average)engine power - which probably drops off in the high rpm.

Driving like that will cause damage - if not to your car, then to some one elses.

As long as there is good oil (and the engine is warm), I don't see it causing any immediate engine damage - but it sure causes alot more wear % tear (and not just the engine). Buy some good tyres. better traction, AND you won't want to waste them.

now you really are showing your smarts... I never encouraged driving on the limiter. and if you read my post that you saw fit to quote you would see I suggested that in a non-turbo skyline peak power would occur long before the rev limit (as it does in turbo versions too). i dont think it's very wise to tell me to buy better tyres. what tyres are you using on your car? have you even driven a tuned GTR with 260kw atw? in rwd? in the wet? I can tell you it's pretty angry when it ramps onto boost. or are you just advising me based on your experience in gran turismo? in fact it's hard to believe you were responding to my post at all. when I said:

"personally i would suggest it's not a good idea. a non-turbo skyline has seen it's best power wise a long way before the limiter anyway so really not much point. you will get a feel for the revs etc as you get used to driving it so wont hit the limiter so much after a while."

but thanks for your valuable advice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To plug the hole. The engine plant may not have known whether the car it was going into had a gauge or not. It was a long time ago and the integrations might not have been fully modern. Or they might not have cared because the extra inventory and processes to save a few cents on the sender might have cost more anyway. But please tell me you are not still confusing the idea of a pressure gauge sender, and an oil pressure light switch. The switch will be out there. In a separate hole. Probably with only one wire running to it. Running the light.
    • Blower needs to go low on the exhaust side, displacing the AC and PS, which you have to decide whether you want to keep and how and where to relocate if you do. Electric option for PS is, at least, helpful. Sadly, there is no workable 12V electric AC of any value. Whilst the blower is the last compression step before the throttle, and so it might seem a good idea to have it near the inlet manifold (as mentioned above), you probably want it to go through an intercooler first, so, having it on the opposite side of the car facilitates that air flow path. The turbo discharges into the blower, so proximity of the turbo's compressor outlet to the blower's inlet is nice. But then you might want to intercool that too, before boosting it again....which would probably be a ball ache. Routing pipes out to the front and back could be a bit shit. If there was room for (at least) a small (but preferably larger) water to air core on that side, then that would probably be the best approach. I guess a reasonable alternative would be to locate the blower where the alternator is (more or less, associated with the inlet manifold, per Matt's thought), and somehow incorporate a water to air core into the manifold, sort of like they do for modern blown V8s. The big difference here though is that those V8s have only the one throttle (upstream the blower) and only the one compression step (the blower) and no need for too much in the way of bypass/blowoff valves. Whereas in a twin charged 6, you do need to think about one or two bypass valves associated with the 2 compressors and you would prefer to have the intercooling done before the air has to pass through the throttle. You'd like the throttle to work approx the same no matter what the compression is doing. But if it is located in hot air stream before a cooler, then sometimes the air will be real hot, sometimes it will be quite cool, and the throttle mapping/response will be quite different between those two cases. The throttle, if sized for hot air, would be too large for cold conditions. It's all a ball ache.
    • Package SC on exhaust side. Remote mount turbo. Still a fair bit of room when you get creative on the inlet side of the motor too. Especially if you can get really creative with the welding, and effectively build it into the bottom of the inlet manifold. Would definitely take some design work, and some trial and error, to make sure flow works well still! Might be easier to just start with the Nissan March though... All the work is already done for you...
    • I'll sit down and get a post together 😁
    • The factory oil pressure sender is no longer in the car that's what is confusing me. In the Taarks adapter I have an aftermarket Bosch style pressure/temp sender and the factory temp sender only. Oil pressure is perfect. Where does the factory oil temp sender go to if there were never any gauges? Why was it there from the factory?
×
×
  • Create New...