Jump to content
SAU Community

Bad Experience With Donnellans...

ES86

By ES86,
in Victoria

 Share

Recommended Posts

ES86 Community Regular

ES86

Posted
Posted

I take some Yoko A032 on 15/7/2006 and ask them to change the tyres for me....

When 1 of the staff is balancing the tyres, i notice that he can't balance the wheels for several times and he looks shit and keep saying f@#$%..etc...

All right.....i didn't drive the car for a few days..

On 20/7/2006, When i drive my car out of my drive way, i found that 2 tyres is flatted and i go to petrol station to pump my tyres up to 30psi....and after 2-3 hours, those 2 tyres drop to 18psi~ or so...

I went back to Donnellans and told them, they said should be a nail in the tyres, but turned out was the rims fitted badly....air was coming out from the gap of the rim and tyre......and they fix it for free..

On the next day, finally i got a chance to drive at freeway, Steering wheel is vibrating badly @ 100km/h...

So i went back to Donnellans and ask them to balance the wheels again.....the staff attitude is bad this time...like 'what are u going to do this time? Oh? Again!?' these kind of shit....after waiting for an hour(someone came later then me but go up the jack earlier then me, f#$ these shit), the guy took off the wheels, told me i need a center ring, but i told him my steering wheel didn't vibrate before i change the tyres...He even didn't bother to put the wheels on the balaning machine and i told him to put it on to see whether the wheel balance was out..and he said 'Ohh its a matter of time wasting'...pissed me off. I wait for one and a half hour, wow and they spend 1 min to take out 1 of my wheels and I am free to go.

I go to Tyre Factory in Mitcham next day, and ask them to balance my wheels again. They said the blance was way out, and yeah, no more vibrating @ 100km/h even up to 200km/h...

Thats too much bad comment with Donnellans....fit the tyres with wrong rotation...adjust coilover with different height all 4 corners...

...now i know they are bad....pissed me off, never deal with them again...

my 2c

Link to comment
https://www.sau.com.au/forums/topic/127733-bad-experience-with-donnellans/
Share on other sites
Jetdat Veteran

Jetdat

Posted
Posted

must say similiar thing happened to me when i bought mags/tyres off them 2 years ago...100km/h vibrations..never b4 the mags though...

anyway i went straight to my trusty mates at traction tyres in rowville and sure enough the balance was way off...

the thing is their prices are really good, in fact i am going there again very soon for some tyres, but straight after i am going to traction tyres for balance/alighnment/general check up :O

simple solution :angry:

ES86 Community Regular

ES86

Posted
  • Author
Posted (edited)

haha maybe i am the only one who posted my bad experience, but most of my friends got bad experience with them, yea keep going there and u will understand what i mean, some guys are just dodgy there..

yeah i like the price of the tyres they got....but i will never fit them there....and wheel alignment too

Edited by ES86
Interloper Veteran

Interloper

Posted
Posted
I take some Yoko A032 on 15/7/2006 and ask them to change the tyres for me....

When 1 of the staff is balancing the tyres, i notice that he can't balance the wheels for several times and he looks shit and keep saying f@#$%..etc...

All right.....i didn't drive the car for a few days..

On 20/7/2006, When i drive my car out of my drive way, i found that 2 tyres is flatted and i go to petrol station to pump my tyres up to 30psi....and after 2-3 hours, those 2 tyres drop to 18psi~ or so...

I went back to Donnellans and told them, they said should be a nail in the tyres, but turned out was the rims fitted badly....air was coming out from the gap of the rim and tyre......and they fix it for free..

On the next day, finally i got a chance to drive at freeway, Steering wheel is vibrating badly @ 100km/h...

So i went back to Donnellans and ask them to balance the wheels again.....the staff attitude is bad this time...like 'what are u going to do this time? Oh? Again!?' these kind of shit....after waiting for an hour(someone came later then me but go up the jack earlier then me, f#$ these shit), the guy took off the wheels, told me i need a center ring, but i told him my steering wheel didn't vibrate before i change the tyres...He even didn't bother to put the wheels on the balaning machine and i told him to put it on to see whether the wheel balance was out..and he said 'Ohh its a matter of time wasting'...pissed me off. I wait for one and a half hour, wow and they spend 1 min to take out 1 of my wheels and I am free to go.

I go to Tyre Factory in Mitcham next day, and ask them to balance my wheels again. They said the blance was way out, and yeah, no more vibrating @ 100km/h even up to 200km/h...

Thats too much bad comment with Donnellans....fit the tyres with wrong rotation...adjust coilover with different height all 4 corners...

...now i know they are bad....pissed me off, never deal with them again...

my 2c

hey dude, thanks for sharing the story :)

Its always interesting to hear peoples experiences, at least it informs people about the possibility of dodgy staff there....and to be wary if they have any problems later on...

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
i agree with interloper... ash... just cause they touch your hiney when you go in there doesnt mean that they do it for everyone...

i've never been there actually :rofl:

I just go by the 100's of positive expiriences. I feel for donellans... this is really gonna hurt thier business

:mellow:

There is a time and a place for everything, bitching on a forum isnt one of them... plus the same thread appeared on NS.com... funny that.

Although that thread was removed. At least i was generous, and we got more of the story out from the complainer himself that he has had good expiriences in the past

Its the usual case of one bad cancells 5 good and someone doesnt see past that

Ronin 09 Grand Master

Ronin 09

Posted
Posted

They're cheap, but 'customer service' isn't a particular strong suit of them.

Might have something to do with having to deal with a shitload of tyre kickers from surrounding areas (yes, asians, who might not have the best grasp of english - and YES I am asian so I'm not being racist..!).

When I got semis on a set of rims (brought them in separate to the car), they took 3 hours to fit them and scratched around the valves (not too badly, so I didn't say anything).

I'm a little in agreeance that a little more customer service would be nice...

there's a simple rule that even when you're hot, you need to maintain service. What happens when you're not?

As an aside, if anyone has ever been into Subaru Docklands, and been asked to 'take a ticket and wait for 50mins', they'll eventually find out that customer service counts for one hell of alot.

/2c/

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...