Jump to content
SAU Community

Recommended Posts

Thanks for checking my vin number brought out the truth to the car :P

Registration papers/import papers indicates its a 93 model but truth is it a 89 model (is that an offence?)

Black pearl metallic is not my orginal colour but is a dark blue pearl

According to the vin check (image attached on page 20) is the car orginally an auto/manuel and did it come with ABS..?

Edited by kelumzi
i just wanted to ask whether this information will be enough to purchase a part from Nissan for my nissan with a r33 RB25DET cause a gearbox part broke and i need to order it?

normally the VIN is all they need (assuming stock car/engine etc).

BNR32-007958

post-4553-1180592755_thumb.jpg

hey boys and girls,

im trying to decode my model #, but can not find a thread that has all the options for the r34.

I have searched and read most of the decode threads on here but none seem to cover all of the r34 options.

any help would be great

thanks

i have alredy posted the vin and recieved back the image, but i want to decode the model number to see what options it came with. so far i can only find r32/33 which some of it is the same as the r34 but alot is missing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...