Jump to content
SAU Community

Recommended Posts

I was just there and booked my car in for a new exhaust. The middle muffler is to low and the whole exhaust is to loud, so he is removing the muffler and making me up a bolt on tip so once im done i can bolt mine back on. So yeah thanks but it will be sorted.

not true, i have a muffler i got made up from the guys at city exhaust that passed over the pits quite well. i'd loan it to you but it either A) probably wouldn't fit as most exhausts are different and B) i don't own the car or the muffler anymore, but could get it in a week or so.

they charged me $160 for a muffler that just bolts on where your existing muffler is, 2 bolts to remove and replace quiet muffler. go and have a talk to them, they're good at fixing that sort of stuff.

i meant the little ones you stick in the end of the cannon that look like a funnel. not a whole muffler.

Ive got a custom tip for any one with a 3.5" exhaust, will get you over pits.

Hey can anyone confirm one of those licencers can get you past rta/dickson rego?

I just got defected today, got 93.6db at 3,200 RPM and didn't think to ask.

If not hope someone can lend me one of their stock R32 GTR exhaust for a week or so.

  • 2 weeks later...

Did they seriously defect you for 93.6db!!!!!!!!!!!

I got done in my old car for too loud and it was 107db.

the bloke said if it was 100 or less he would have let me off

but it was way higher.

he also said that the limit is 95db

Did they seriously defect you for 93.6db!!!!!!!!!!!

I got done in my old car for too loud and it was 107db.

the bloke said if it was 100 or less he would have let me off

but it was way higher.

he also said that the limit is 95db

the limit in ACT for a Skyline (its based on cyl's and weight iirc) is 92db.

the limit in ACT for a Skyline (its based on cyl's and weight iirc) is 92db.

Yer, I had to take it over the pits at dickson. but they showed me this spread sheet that they were going off.

if it was a post 1983 car, 6 cyl. maximum was 90db at 3200rpm. I think most 83 cars you can have it louder.

So no one's got an exhuast I can borrow for a couple of days or so? might have to resort to welding a silencer on the the exhuast or going to the wreckers.

honestly man, when you get the cash, get a garage to build you a turbo back exhaust that is legal and performance orientated - saves a ton of time.

The exhaust on mine is *magic* - noticably different note to most skylines i've heard, quieter that any i've heard at idle, and louder than my mates at full noise.

sounds beautiful imho.

  • 2 weeks later...

Hi Guys,

been a while since ive been here but i really like this idea so i thought i maybe some help.

Car: r33 gtst

Year: 1995

Parts: stock springs (in the next week or two), stock intercooler, stock BOV

Conditions/Price: no condition as long as i get it back and that if i ever need help then i get help but not by force :)

  • 3 weeks later...
Need exhaust silencer ASAP!!!!! I just failed for being to low and might be to loud. Im going to raise my suspention now (well try) but i really need a silencer.

Help Please :O

Hey mate, i got a better solution, i read somewhere a few days ago there is a little thing u buy stick it in yr exahst system and its basically a controlled butterfly that controlls how loud yr exauhst is..might be an option i am getting one soon...when i get my car complied..

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...