Jump to content
SAU Community

Recommended Posts

What is the best method/product for cleaning brake dust and other assorted crap off of this type of wheel? As you can see I haven't been able to master the tecniques required to get into the bits behind the spokes (read: I'm too lazy to do it with a toothbrush and take all day). Is there a chemical thats designed to get rid of this grime, but not the paint or anything else?

Be nice to the newbie. :)

Link to comment
https://www.sau.com.au/forums/topic/129019-how-to-clean-spoked-wheels/
Share on other sites

There is an eagle 1 tyre and wheel cleaner, ive used it a couple of times on my rims, but i dont usually do behind the spokes. Not too sure if this stuff is suitable to painted rims, but ive got shadow chrome and they seem fine after a few uses.

Evil

We have this stuff at work called Acid Klene its about $200 for a 20L drum and I just spray this straight onto my rims then rinse off with the high pressure hose and they look brand new gets rid of ALL the brake dust, its amazing how well it works, have used it on many friends cars and their shocked with how well it works, im not sure if its available through any shops though? We get it through a company called Jasol,

I guarentee this would work just be careful if you manage to get a hold of it because if you breathe the fumes from it in you will get high as a mofo.

Edited by Dave69001

All I use is plain water and an old rag, it gets all of the grime off. But I have to clean my rims every week as I have white rims so as long as I keep it up I don't need anything harsher. They are 6 spoke, nothing as insane as the ones you are trying to clean.

I use the Zymol wheel cleaner with the little brush - smells kinda minty.

I've got wheels with studs around the dish so can be hard to clean properly without a little assistance. But the brush makes the job pretty easy...

Works well for me...

http://www.zymol.com.au/products/productde...p?pid=2&p=1

buy some new rims that are eaiser to clean.... :)

like warren said, head to supercheap, ive been using kitten and armourall wheel cleaners, spray on hose off sparkle sparkle easy as, just do it often so the dust dosent collect

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...