Jump to content
SAU Community

Recommended Posts

  • Replies 141
  • Created
  • Last Reply

Top Posters In This Topic

Well, this time tomorrow I will have done approx 100-200km of drift and grip at the creek and looking forward to the additional 100-300 in the arvo!

See everyone there at around 8am. Try and get in a group along the open sheds at the back of the main pit garages.

Lets go use a skyline like is meant to be used!

What a great day.

It was great meeting new people and catching up with the regulars.

I had a great time.

Fatz, you need to sort out your priorities as the ONLY wedding that has priority over a great day of drifting is you own. You missed a excellent day, I hope your brother made it home on the steel belts ok.

If anyone got any pics of the Black Typhoon, I would love to get a copy.

Thanks

I totally agree - what a great day!

The day was really well run, thumbs up Initial Drift!

The 45 minute sessions actually worked well, I thought they may have been to long first up but it actually gives you time to get your eye in, string a few quick(?) laps together, take it easy and let every thing cool down for a few then hit it again and look for improvement.

My fastest time was actually in the first session (1:55.55) and i couldn't improve on it all day - might have had something to do with not having brakes. We heard a scraping noise on the way to the pub for lunch and found no rear pads left. The 45 minute sessions were good here as well cos' I was able to change both front and rear pads during the 'drift' session.

Unfortunately I reckon that opportunities like today will soon become a thing of the past because of lack of support. It seems everyone asks for a Saturday track day however on the day it was the same crew that support the weekday ones that turned out.

All of us had a great time sharing a passion with like minded enthusiasts.

Once again, a great day - thanks to all that contributed.

photos of the day anyone?

glad it was good - i wish i could have made it - the paintball welts all over mybody whish i went to this day - dam brother and his stupid bucks pary

hahaha

was fun tohugh

so post up pics if u got them of the grip n drift!

Unfortunately I reckon that opportunities like today will soon become a thing of the past because of lack of support. It seems everyone asks for a Saturday track day however on the day it was the same crew that support the weekday ones that turned out.

Initial Drift will not be running a ec day for a while. This is the second time they have lost money big time trying to run a ec day. Where the hell was everyone?? Think there was about 25 cars and most of them were drifters. It was good doing thousands of laps with nobody in sight (although it cost a shit load in fuel) but its tough seeing the initial drift club loosing money running these awesome days.

Yeah it was a big day, there was no reason for not having heaps of people, it was a Sat, plenty of notice and fine weather. Must have something to do with the volume of other track day at the moment.

I had a good day, had 3 laps on slicks pushed out a 1.50 and then popped a slick on turn 2, lucky I had almost stopped.

Somethings wrong with the trkbtch, will find out more later.

I had a good day, had 3 laps on slicks pushed out a 1.50 and then popped a slick on turn 2, lucky I had almost stopped.

And I thought the R34 was exhausted from the effort of getting past 89kw of raw Lotus power. :D

For those of us doing Grip sessions it certainly was a great day with lots of track time. This certainly was great for participants but a shame for IDA and their bank balance.

And I thought the R34 was exhausted from the effort of getting past 89kw of raw Lotus power. :)

Kero,

The lotus was doing 1.52-3 laps he missed the power down the straight, but loved the back part of the course.

I was only running 11psi so I hardly had big HP.

Kero,

The lotus was doing 1.52-3 laps he missed the power down the straight, but loved the back part of the course.

I was only running 11psi so I hardly had big HP.

i think kero is trying to say you drive like a nancy boy oz!!!!

The lotus was doing 1.52-3 laps he missed the power down the straight, but loved the back part of the course.

I wish I was doing those times. According to my lap timer my FTD was 1.55.34 which was also a personal Best at EC. The car pretty much hits terminal velocity of 200km/h. If I'd improved the aerodynamics by putting the roof on I might have gotten an extra 5km/h or so out of it and broken into the 1.54s.

I was impressed seeing the R34 going into turn 1 at about 200km/h without using the brakes (just before the tyre shat itself). The only other car I noticed not using the brakes there was the Ralliart Colt.

1.55 is a good time, I thought you were going a little quicker then that.

If Im going full pace I have to use the brakes at the 100 meter mark, one quick stab, get some balance and back on the juice. If I p!ssed the STD suspension off then I might be able to get it quicker round there.

I only had 4 laps on the slicks. 2 warm up and then 2 lap's at full noise. I got a 1.55 then a 1.50.45 and was hoping to break that elusive 1.49's once I got into it, I guess I will have to wait until the SAU drive day on the 7th Oct before giving it another go!

Looked like you guys were having a blast out there

Good to catch up with Mal aswel - havnt seen him for ages

I was a bit suprised they were charging spectators to watch though




  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...