Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • Replies 130
  • Created
  • Last Reply

Top Posters In This Topic

But that would be useless to most people without pics :)

NS2500: We have excactly the same headunit in our car, I'm going to take half of it out again so I can spray paint the plastic surround black. The grey colour doesn't match with my dash.

  • 1 month later...

Howdy, just though you might like to update the link, as I get a 404 - Error not found when trying to load it!

Also I have just bought an R33 and it did not come with a stereo, as the guy wanted an extra $2000 for it, so now I have put just a cheapy in to get buy until I can get a half decent one, but for some reason, the dash clock now stays on all the time? I have unplugged it so it does not drain the battery, but can someone tell me what I have done wrong?

Thanks,

Ska

Greg,

Looks AWESOME! I am going to take your lovely wiring guide now and try to see what wires are connected to what as there is definatly something wrong as I could not get my stereo to work off what I thought was acc power, so I just bunged it on constant power, which is alright, just have to remember to turn it off, but an interesting side affect was that my dash clock now stayes on, so i just unplugged it.

But now I can really see what is what, THANKS!!!

Ska

  • 2 weeks later...
I am such a dumbass..... was in such a hurry to change CDs today I accidentally missed the slot and shoved it into the R33 - like really INTO the car.  

*sigh*  

quick question... anyone know how to retrieve it without having to drag out the whole deck??

Use the force???

I once found a Michael Jackson CD that had been lost in a car this way... Who knows what you might find behind there :crazy:

  • 3 weeks later...

is this the same for installing an R32 deck. mine doesn't sit properlyt and I found out it doesn't have the standard brackets. gettingh them from Just jap. bought a new sleeve from nissan. if I follow the R33 guide will it fit the same? I can take the dash apart myself easy enough, so is fitting the same

mark

  • 2 weeks later...
is this the same for installing an R32 deck. mine doesn't sit properlyt and I found out it doesn't have the standard brackets. gettingh them from Just jap. bought a new sleeve from nissan. if I follow the R33 guide will it fit the same? I can take the dash apart myself easy enough, so is fitting the same

mark

Fitting is straightforward, eg. screw the unit in where it fits! As to the wiring I'm not so sure. Does anyone know if the R32 wiring is the same? S1 and S2 R33 are the same.

  • 2 weeks later...

Hi NS2500,

Thank you for your AeroPro links, they were most informative. My only question is this. I had as factory a tape and CD player, but it appeared that there were two wiring looms for the car.

I can only presume one is for the pwr, remote etc, and the other is for speakers etc. Given this, do you know where I can find the other loom (model no. etc,) to plug into the second factory adapter?

Thanks heaps for your help.

Has anyone installed the DEh-8500MP or DEH-850MP!!!!

I installed it yesterday but the outside bracket was too large to fit...does this mean i have to pull the headunit out further from the chasis so the frame can fit???

Thanks in advance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...