Jump to content
SAU Community

Recommended Posts

thats a load of shit. i had a gates (blue) belt put on. it was noisy, i took it back the the retard who fitted it and told him to re-tension it.

problem solved. never took my car to him again. belt has never made a sound since.

thats a load of shit. i had a gates (blue) belt put on. it was noisy, i took it back the the retard who fitted it and told him to re-tension it.

problem solved. never took my car to him again. belt has never made a sound since.

like I said, IN MOST CASES... not all.. read the post...

  • 2 months later...

Hmm reading through this.....mine whirs like a bitch......now im thinkng the tensioners might need replacing...any one know the part number and or rough price for the whole lot.....i have a gates belt but its the black one.

Andrew

I would suspect the tensioner bearings for the noise first and belt (as in belt not fitting the gears neatly) second, more than likely the warn/loose old belt has reduced the tension on the tensioner bearings etc and now that you have put a new belt on it is highlighting a problem that was already there - due to the extra tension on the bearings. Another thing that may be contributing to the noise could be the extra strength the blue gates belt has/retains over the std belt, to me this would make sense that the belt must be less stretchy than the std and therefore this would also mean the bearings are being submitted to extra tension and cause any wear in them to be more easily noticed.

I have used Gates belts on a few engine rebuilds in the past and never had a problem with any of them. If replacing the bearings doesn't fix the noise and your gears are in good condition(i.e. no obvious damage) then I would be making a complaint to Gates directly, I am sure their engineers would be interested if there was a problem i.e. belts not meshing fully with a cam/crank gear...

  • 4 weeks later...
I have used Gates belts on a few engine rebuilds in the past and never had a problem with any of them. If replacing the bearings doesn't fix the noise and your gears are in good condition(i.e. no obvious damage) then I would be making a complaint to Gates directly, I am sure their engineers would be interested if there was a problem i.e. belts not meshing fully with a cam/crank gear...

There should not be an issue of the Gates belts not fitting in the cam gears. Gates make the majority of OEM timing belts for cars around the world (about 70%) so quality won't be an issue. I tend to agree with the gts4diehard, the racing timing belt is stronger and will not stretch as much as the original. This may mean that it requires a different tension to the original.

I would love to know if anyone has an actual figure of what the tension should be for the timing belt. I have the service manual and it just says something like "tension timing belt to the correct tension". That is pretty usless info as I can't find anywhere what the correct tension is. It has the tensions for the accessories belts but not the timing one.. stupid.

I had my timing belt changed to a gates racing belt by a tuning shop and it hums intermitently. I also had the tensioner, idler, adjustable ex cam gear, and water pump changed at the same time. It is no good that so many people have experienced this.

Edited by Fry_33
  • 2 weeks later...

So some of u r suggesting to throw away a good belt that is brand new and freshly put on the engine... Big deal it makes a bit of a noise. Save urselves the embarressment at lights and sell ur R33 :).. If any1 asks u have a gates timing belt, most of the bogans next to u in the VN commodores would be impressed by that if u bought ur car to impress other ppl. From the read it sounds like it is very common with the gates belts. I am just getting one installed myself by a workshop who use them on track cars... If they were that shit I don't they would be used for track purposes on pretty modded engines.

Liam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...